Hdmi Arc Connection; Connect Power; Network Requirements - Grundig DSB 980 Manual De Usuario

CONNECTION _______________________________

HDMI ARC Connection

ARC (Audio Return Channel)
The ARC (Audio Return Channel) function allows
you to send audio from your ARC- compliant TV to
your sound bar through a single HDMI connection.
To enjoy the ARC function, please ensure your TV
is both HDMI-CEC and ARC compliant and set up
accordingly. When correctly set up, you can use
your TV remote control to adjust the volume output
(VOL +/- and MUTE) of the sound bar.
• Connect the HDMI cable ( included ) from
unit's HDMI (ARC) socket to the HDMI (ARC)
socket on your ARC compliant TV. Then press
the remote control to select HDMI ARC.
Tips:
• Your TV must support the HDMI-CEC and ARC
function. HDMI-CEC and ARC must be set to On.
• The setting method of HDMI-CEC and ARC may
differ depending on the TV. For details about ARC
function, please refer to the owner's manual.
• Only HDMI 1.4 or higher version cable can
support the ARC function.
• Your TV digital sound output S/PDIF mode setting
must be PCM.
Connect the (DAB/FM) Aerial
• Connect one end of the (DAB/FM) aerial
(included) to the ANT. socket at the rear of the
unit. Then position the aerial to obtain optimum
reception.
IMPORTANT:
• You may need to adjust the position of the aerial
when tuning the radio to receive the strongest
signal.
• Never leave the aerial where it can be pulled by
young children.
Use the AUX Socket
• Use a RCA to 3.5mm audio cable (not included)
to connect the TV's audio output sockets to the
AUX socket on the unit.
• Use a 3.5mm to 3.5mm audio cable (included)
to connect the TV's or external audio device
headphone socket to the AUX socket on the unit.

Connect Power

Risk of product damage!
• Ensure that the power supply voltage
corresponds to the voltage printed on the back
or the underside of the unit.
• Before connecting the AC power cord, ensure
you have completed all other connections.
• Connect the mains cable to the AC~ socket of
the main unit and then into a mains socket.

Network Requirements

• A broadband internet connection in combination
with a wireless access point (Wi-Fi), router or
similar network device is required for GRUNDIG
GSB 920 / DSB 980 Internet radio function.
• Ensure the wireless network device supports
Wi-Fi (802.11 b/g/n) wireless connection.
• Ensure the wireless access point name (SSID)
must be visible and you know the WEP, WPA or
WPA2 security code (password) to activate the
connection.
• Check with your PC, tablet or smartphone to
make sure that you connect your device to the
correct wireless network.
Notes:
• The strength of the RF signal will depends on
the distance between the device and your Wi-Fi
router.
ENGLISH 35