Carton Contents; Handle Assembly - SNOWJOE Sunjoe MJ400E Manual Del Operador

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Unpacking

Carton Contents

• Electric lawn mower
• Upper handle
• Lower handles (2)
• Upper handle knobs and bolts (2)
• Lower handle knobs (2)
• Cable clips
• Grass collection bag
• Spanner wrench
• Manual and registration card
1. Carefully remove the lawn mower and check to see that all
of the above items are supplied.
2. Inspect the product carefully to make sure no breakage
or damage occurred during shipping. If you find damaged
or missing parts, DO NOT return the unit to the store.
Please call the Snow Joe
department at 1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new electric lawn
mower. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils,
or small parts. These items can be swallowed and pose
a suffocation risk!
Assembly
m
WARNING!
Do not connect to the power supply
until assembly is complete. Failure to comply could result in
accidental starting and serious personal injury.
m
WARNING!
Never operate the mower without the
proper devices in place. Never operate the mower with
damaged safety devices. Failure to heed these warnings can
result in serious injury.
+ Sun Joe
customer service
®
®

Handle Assembly

1. Fit the lower handles on the unit by inserting the unit's
threaded ends into the holes on the lower ends of the
lower handles. Install the lower handle knobs on the
threaded ends, and tighten (Fig. 1).
Fig. 1
2. Align the upper handle with the holes on the upper end of
the lower handles, and insert the upper handle bolts into
the holes from the inside (Fig. 2).
NOTE: You may need to bend the lower handles inwards
slightly while fitting the upper handle frame over the lower
handle ends.
Fig. 2
Upper handle
Lower
handle
3. Secure the upper handle by tightening the upper handle
knobs on the ends of the upper handle bolts (Fig. 3).
7
Lower handle
knobs
Upper handle
bolts
Tabla de contenido

Solución de problemas

loading

Tabla de contenido