EN
40
TROUBLESHOOTING
Problem
E01
E02
E03
E04
E05
E06
No display is shown
on the screen.
The oven lamp does
not light up.
Fan does not work
No response from the
buttons.
No steam
Possible Cause
Open circuit of the top
sensor
Short circuit of the top
sensor
Open circuit of the bottom
sensor
Short circuit of the bottom
sensor
Open circuit of the
evaporating heater sensor
Short circuit of the
evaporating heater sensor
Check that the mains plug is
plugged in.
Display panel is in poor
contact.
The oven lamp is damaged.
Poor contact.
Poor contact.
Fan is damaged
The control panel is broken
or the key lock is active.
The time LED flashes, all
other buttons do not react.
Water pipe is blocked.
Evaporator heater is
damaged.
Water intake system is
damaged.
Suggested Solution
Stop operation, open the
oven door and let the
appliance cool down for
10 minutes. Restart the
appliance or contact the
customer service.
Contact the customer
service.
Contact the customer
service.
Insert the mains plug into the
socket.
Contact the customer
service.
Replace the oven lamp or
contact the customer service.
Contact the customer
service.
Contact the customer
service.
Deactivate the key lock or
contact the customer service.
Make sure that there is
enough water in the water
tank and that it is correctly
inserted into the appliance.
Contact the customer
service.