Cleaning Agents - Siemens iQ100 Instrucciones De Uso

Cleaning agents

Appliance exterior
Appliances with stainless
steel fronts
Cooking compartment
Cooking compartment made of
stainless steel
Recess in cooking compartment
Turntable and turntable ring
Wire rack
Door panels
Seal
114
q Do not use coarse scouring pads or cleaning
sponges.
Rinse out new sponge cloths thoroughly before use.
Before cleaning, unplug the appliance from the mains
or switch off the circuit breaker in the fuse box.
Clean the cooking compartment and the outside of
the appliance with a damp cloth and mild cleaning
agent. Dry with a clean cloth.
Always remove any flecks of limescale, grease, starch and egg
white immediately.
Before using the appliance again, allow the surface and all parts
to dry thoroughly.
Special stainless steel cleaning agents can be obtained from the
after sales service or from specialist retailers.
Do not use metal or glass scrapers for cleaning.
Do not use oven spray or other aggressive oven cleaners or
abrasive materials. Scouring pads, rough sponges and pan
cleaners are also unsuitable. These agents scratch the surface.
Allow the interior surfaces to dry thoroughly.
Use a damp cloth, and make sure that water does not enter the
appliance through the turntable drive.
Soapy water.
When replacing the turntable, make sure it slots in correctly.
Hot soapy water. Stainless steel cleaning agent or in the
dishwasher.
Glass cleaner:
Clean with a dish cloth.
Do not use metal or glass scrapers for cleaning.
Use soapy water and dry with a soft cloth.
Do not use metal or glass scrapers for cleaning.