Water Load/Unload (Bain-Marie Version) (Rif. 13); Setting And Controlling The Temperature; Loading The Cabinet - Arneg Belgrado TCBM Manual De Instalacion Y Uso

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Belgrado TCBM-TCPW
English
4 - Heating LED:
5 - Heating fitting;
6 - Anti-condensate ventilation.
7 - Load/unload switch (bain-marie version)
1

14.Water load/unload (bain-marie version) (Rif. 13)

Water supply pressure 300 kPa (3 bar)
With master switch (1) in ON position, the water can be loaded into the cabinet
tank.
14_1.Water load:
Set water load/unload switch -7- at 1. In this way, water will start to load
automatically, the operation will end automatically when the level of the water has
reached the floating level switch.
With the water load switch at 1, the level with be restored automatically.
To guarantee complete cleanliness of the cabinet, the water must be removed from the
containment tank.
14_2.Draining the water
1 - Move the water load switch to position O, the automatic water load is blocked in
this way.
2 - Remove the tanks to access the "overflow" pipe -A-
3 - Remove the "overflow" safety pipe -A-
4 - Remount the pipe after complete draining -A-
15.Demisting system
The cabinet is fitted with fans, positioned under the front window, which allow to
prevent annoying condensate on the glass surfaces (Rif. 15)
Activate the anti-condensate fans when they are required
During normal use, the demisting system must not be started.

16.Setting and controlling the temperature

Turn the tank thermostat knob (par. 13 n. 3) selecting the desired temperature. We
recommend setting it at 90°C.
The temperature is controlled via the mechanical thermometer positioned on the rear
part of the cabinet near to the control panel and via the thermometer positioned on the
stainless steel frame (Rif. 10).

17.Loading the cabinet

To stock up the cabinet, certain important rules must be followed:
Heat the cabinet for at least 2 hours in a way to reach an acceptable internal
temperature.
The hot food products must be loaded into the cabinet immediately after cooking
and always at a temperature no lower than 65°.
The hot cases are not designed to heat or cook foods but just preserve the product
32
2
3
4
5
6
7
05060145 01 31/08/2015
Tabla de contenido
loading

Este manual también es adecuado para:

Belgrado tcpw

Tabla de contenido