Operation And Maintenance; Technical Parameters; Environment Protection - VERTO 52G418 Manual Del Usuario

Releasing the trigger – set the the trigger lock lever in the unlocked
position (fig. D).
INSTALLATION OF DETERGENT SPRAY ASSEMBLY
Disconnect the cleaner from power supply.
• Ensure the trigger of the gun handle is locked.
• Fill the detergent container (h) with appropriate detergent.
• Install appropriate spraying tip (i) on the detergent container (h)
(place feeding pipe in the container).
• Disassemble front part of the lance (with the nozzle).
• Attach spraying tip to the lance. (fig. H).
• Direct the nozzle onto the surface that you plan to apply detergent
on and release the trigger lock.
• Press the trigger (when the cleaner is switched on, the detergent in
the container will be sucked and mixed with water).
• Apply detergent and clean.
High pressure cleaner is designed to work with cleaning agents
recommended by the manufacturer. Use of other cleaning agents
may have negative impact on safe operation of the tool. Do not
use acids, petrol, kerosene or other flammable liquids as cleaning
agents. Use domestic-purposes detergents only (pH 6-8).
Before starting to use the high pressure cleaner ensure there are
no other persons or animals in the work area.
Some surfaces may get damaged by high pressure water stream.
• Never bring the nozzle closer than 30 cm away from the cleaned
surface (when in any doubts whether the water pressure may cause
any damage, try effect in small, not visible place).
• Never use the cleaner to clean surfaces with easily removable
coating.
• Always move the stream on the cleaned surface. The water stream
must not be directed at the same spot for long time, because it may
damage the surface.
• Before high pressure cleaning always consult the manufacturer
of object to be cleaned, whether the surface is suitable for such
treatment.

OPERATION AND MAINTENANCE

Unplug the power cord from the mains socket before commencing
any activities related to installation, adjustment, repair or
maintenance.
CLEANING
• Keep the cleaner body, gun handle, pressure hose and the lance
clean.
• Keeping the nozzle clean is necessary for effective cleaning.
• Clean the nozzle on a regular basis using the cleaning rod.
• Entrust all repairs of the cleaner only to a qualified person. Only
original parts should be used.
• Damaged electric power cord should be replaced by qualified
electrician.
• There are no parts inside the high pressure cleaner that require user
service or maintenance. Take the tool to authorized workshop when
internal parts of the cleaner require repair.
STORAGE
• Disassemble gun handle, pressure hose and cleaner lance and keep
them in a dry place.
• Keep the cleaner beyond reach of children.
• Avoid keeping the cleaner in temperature below 5
water inside the cleaner).
All faults should be repaired by service workshop authorized by the
manufacturer.

TECHNICAL PARAMETERS

RATED PARAMETERS
High Pressure Cleaner
Parameter
Supply voltage
Current frequency
Rated power
Protection class
Protection level
Water supply pressure
Minimum water supply flow
Working pressure
Maximum working pressure
Ambient temperature
Maximum water supply temperature
Weight
Year of production
NOISE LEVEL AND VIBRATION PARAMETERS
Sound pressure: Lp = 88 dB(A) K = 2 dB(A)
A
Sound power: Lw = 98 dB(A) (2000/14/EC)
A
Vibration acceleration: a
h

ENVIRONMENT PROTECTION

Do not dispose of electrically powered products with household
wastes, they should be utilized in proper plants. Obtain information
on wastes utilization from your seller or local authorities. Used up
electric and electronic equipment contains substances active in
natural environment. Unrecycled equipment constitutes a potential
risk for environment and human health.
* Right to introduce changes is reserved.
"Grupa Topex Spółka z ograniczoną odpowiedzialnością" Spółka komandytowa
with seat in Warsaw at ul. Pograniczna 2/4 (hereinafter Grupa Topex) informs,
that all copyrights to this instruction (hereinafter Instruction), including, but not
limited to, text, photographies, schemes, drawings and layout of the instruction,
belong to Grupa Topex exclusively and are protected by laws accordingly to
Copyright and Related Rights Act of 4 February 2004 (ustawa o prawie autorskim
i prawach pokrewnych, Dz. U. 2006 No 90 item 631 with later ammendments).
Copying, processing, publishing, modifications for commercial purposes of the
entire Instruction or its parts without written permission of Grupa Topex are strictly
forbidden and may cause civil and legal liability.
12
0 C (risk of freezing
Value
230 V AC
50 Hz
1400 W
II
IP X5
0,3 MPa
5 l /min
6,5 MPa
9,5 MPa
5 0 C – 40
40
4,5 kg
2015
= 3 m/s 2 K = 1,5 m/s 2
0 C
0 C