Tabla de contenido
Idiomas disponibles
Idiomas disponibles
12.
ENGLISH
CLEANING
Always switch Trimmer OFF before cleaning.
Do not use abrasives, scourers or liquids such
as alcohol, benzene, bleach or acetone to
clean the Trimmer.
Never clean, remove or replace Guide Comb
Attachment with motor ON.
Do not apply pressure to cutters.
Do not touch cutters with hard objects as
this may damage them.
Do not use while bathing, showering or
immerse the Trimmer in water or other
liquids as damage to Trimmer may occur.
During Use:
If cut hairs have accumulated in the Guide
Comb area, pull Guide Comb Attachment off
Trimmer and remove hairs by shaking and/or
blowing.
Once A Week:
1
Make sure the Trimmer is switched OFF
and disconnected from the electrical
outlet.
2
Remove the Guide Comb Attachment.
C
3
Open the cutting unit.
C
4
Clean the cutting unit and the inside of the
Trimmer with the brush supplied.
C
5
Close the cutting unit by pushing it back
into place on the Trimmer until you hear a
click.
REPLACING THE CUTTING UNIT
If your cutters become damaged or worn,
do not continue using the Trimmer.
Replace cutters immediately.
1
Open the cutting unit.
C
2
Remove the old cutting unit by pulling it
upwards.
C
3
Place the two notches of the new cutting
unit into the guiding slots.
4
Push the cutting unit back onto the
Trimmer until you hear a click.
ENGLISH
13.
Capítulos
Tabla de contenido
