Idiomas disponibles
Idiomas disponibles
16"
(40.6 cm)
11-1/4"
(28.6 cm)
2-1/2"
(6.4 cm)
1-1/2" OD
Product Information
Applicable product:
Integral apron, left drain
Integral apron, right drain
Fixture*:
Bathing well:
Basin area bottom
45-1/8" (114.6 cm) x 19-11/16" (50 cm)
Basin area top
52-3/4" (134 cm) x 25-5/16" (64.3 cm)
Weight
100 lbs (45.4 kg)
To overflow:
Water depth
15" (38.1 cm)
Capacity
58 gal (219.5 L)
* Approximate measurements for comparison only.
Blower motor:
Heater
300 W
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Blower motor:
1064187-1-C
60" (152.4 cm)
3/4" (1.9 cm)
K-1122P-GLA
K-1122P-GRA
V
Hz
A
120
60
5
120 V, 15 A, 60 Hz
No change in measurements if connected
with drain illustrated. (K-7272)
19"
(48.3 cm)
Notes
Install this product according to the installation guide.
Floor support under product must provide for a minimum of
46 lbs/square foot (223 kg/square meter) loading.
The hot water supply should be 70% of capacity or greater.
Installations will vary.
Fixture conforms to CSA B45 and ANSI Standard Z124.1.2. All
dimensions are nominal.
2
1-1/4"
(3.2 cm)
1/2" (1.3 cm) R.
Integral Flange
Detail
32" (81.3 cm)
Kohler Co.
