Tools And Materials; Before You Begin - Kohler K-6505 Guia De Instalacion

Tools and Materials

Adjustable
Strap
Wrench
Wrench
Small Level
5/32" Hex
Drill and
Wrench
Hole Saw
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Before You Begin

Please read all instructions before you begin.
Shut off the water supply.
Observe all local plumbing and building codes.
IMPORTANT! For proper drainage of the spout, only install to a
level surface.
Before installation, unpack the new faucet trim and inspect it for
damage. Return it to the carton until installation.
For optimum performance, Kohler Co. recommends installing
3/4" high flow valves connected to the spout with 5/8" Nominal
Tubing (3/4" OD).
If compression fittings are used, type M, K, or L hard drawn
tubing is recommended.
Provide an access panel for all installations.
Rigid connections are recommended for this installation, however
flexible hose is provided. Follow the instructions for your chosen
method of installation.
1011134-2-B
1-1/2" Thin Wall
Hacksaw or
Socket Wrench
Tubing Cutter
Assorted Plumbers
Screwdrivers Putty
2
Propane
Torch
Solder
Kohler Co.