Bronze Luxury-Lift
Operating Instructions
– To reduce the risk of electric shock, serious injury
DANGER
or death:
• Do not let children play on or near the chair when in use. Serious injury or death could
occur if head or body parts are under the chair when the chair is in motion.
• Liquids exposed to electricity pose an immediate risk of electric shock. Do not use this
unit if the power control is damaged, wet, in contact with or near spilled water or any
liquid. Do not use the unit if the button activation switch has been exposed to water
or any liquid. Do not handle the plug or remote control with wet hands.
• Keep cord out of reach of small children, and do not use where it may be a trip hazard.
– To reduce the risk of burns, fire, electric shock,
WARNING
serious injury or death:
• Plug directly into a wall outlet. Do not use an extension cord, adapter or surge protector.
• Do not place power supply underneath the chair.
• The Bronze lift chairs are intended for a single occupant, not exceeding 300 pounds.
Do not operate the chair with more than one occupant in or on any part of the chair.
• Sit down in the unit slowly. To avoid tip over, do not throw your weight against the back
of the unit. Move the unit into or out of the reclining position slowly, making sure that no
children or pets are in close proximity.
• To safely exit the unit and prevent a tripping hazard, bring the back upright and close the legrest.
• Unit is designed to ease exit from the chair. Take care to not slip out of chair when chair is in motion.
• Remove hand wand when not in use, and store out of reach of children.
NOTICE
– To reduce the risk of product damage:
• After 2 minutes of continuous operation of the lift and recline features, allow the
features to rest for 18 minutes.
Getting Started
To avoid product damage, the lift and recline features should not be operated continuously for extended
periods of time. After 2 minutes of continuous operation, allow the lift and recline features to rest for 18 minutes.
Plug the power supply directly into a wall outlet. Place the power supply on the floor, behind the
chair. Keep the cords and cables away from the base and mechanism. Do not place the power
supply underneath the chair.
Bronze Luxury-Lift
®
Power Recliner Operation
This recliner features a simple, easy-to-use hand wand with only two buttons to operate the recliner. The top
LIFT button moves the chair from the upright seated to lifted position and from the recline to upright seated
position, while the bottom RECLINE button moves the chair from the lifted to upright seated
position and the upright seated to recline position. Both the back and legrest move at the same time.
To sit down in the chair:
1. Stand beside the chair, press down on the LIFT button and hold. Release the button when the
chair reaches a comfortable height to sit against, depending on your personal needs and preference.
2. Step back into the chair and sit in the center of the seat while keeping your feet firmly on the floor.
Use the chair arms for support and sit slowly.
3. Press down on the LIFT button again and hold to lower the chair. Release the button when the
chair reaches the upright, seated position.
12
®
Power Recliner
Bronze Luxury-Lift
Operating Instructions
To recline the chair:
The back and legrest move together using the LIFT and RECLINE buttons on the front of the hand wand.
1. With the chair in the seated position, press and hold the RECLINE button to recline the back
and raise the legrest. Release the button when you are in a comfortable position.
2. Make adjustments to the back and legrest recline as preferred.
3. To return the chair to the upright, seated position, press and hold down on the LIFT button.
Release the button when you reach the upright, seated position.
To stand up from the chair:
The LIFT button provides a coordinated movement of the lift function.
1. Firmly position your feet on the floor to maintain balance and prevent sliding or falling. Press
down on the LIFT button and hold to raise the chair to the standing position.
2. Release the button when the chair reaches a height that enables you to comfortably stand.
Carefully exit the chair.
3. Return the chair to the upright, seated position if you will be away from the chair for an
extended period. Press down on the RECLINE button to lower the chair. Release the button
when the chair is in its upright, seated position.
Additional Operating Features:
Safety Legrest
The legrest of the Bronze lift chair closes using spring pressure for safety. When the path of a closing
legrest is blocked by most ordinary obstructions, the obstacle in its path overcomes the spring pressure
and stops the legrest from closing.
If the legrest stops moving when returning to the closed position, carefully look for an obstruction and
remove it. Gently pull up on the legrest, remove the obstruction and gently release the legrest to allow it
to close. If you cannot easily remove the object, ask for help or contact your La-Z-Boy
Power Supply Over-Current Protection
The Bronze series lift chairs are equipped with over-current protection. This feature prevents damage to
the motors and electronics if there is an overload, short circuit or ground fault. Should the system detect
an over-current, the system shuts down and the recliner stops functioning.
If the over-current protection is activated, stop pressing the button in use. The system should reset
automatically. If you believe the chair is not being overloaded, or experiencing a short circuit or ground
fault, you may restart the function of the chair after the button has been released. Should the over-
current protection trip repeatedly, refer to the Troubleshooting section in this manual.
Additionally, the power supply includes a green LED status light to indicate power is being supplied to
the system. If the light is not illuminated, no power is being supplied to the system. Refer to the
Troubleshooting section in this manual if the power supply is plugged in, but the green light is not illuminated.
(Operating Instructions Continued)
®
Power Recliner
®
dealer.
13