Bronze Luxury-Lift ® Power Recliner; Glide Adjustment Instructions; Assembly Instructions - LAZBOY Bronze Luxury-Lift Instrucciones De Operación

Bronze Luxury-Lift

Glide Adjustment Instructions

WARNING
– To reduce the risk of serious injury:
• Provide a clear path for operation of the back and legrest. Place tables and area rugs at
a distance to allow the legrest to fully extend without rubbing or interference.
Adjusting the Glides
Adjustable glides are located in bottom of the mechanism base assembly, one at each corner. Use
the glides to raise, lower and level the chair as required. Make sure to adjust the glides to a height
that provides a clear path for operation of the legrest (see Furniture Placement on page 20).
Turn the glide clockwise to raise the chair or counterclockwise to lower the chair.
•
Check alignment and make adjustments as necessary.
•
Repeat these steps for each adjustable glide, if necessary.
•
10
Power Recliner
®
Adjustable Glide
Adjustable Glide
Bronze Luxury-Lift
Battery Backup Assembly Instructions
WARNING
– To reduce the risk of serious injury:
• In the event of a power failure, the battery backup provided may not lift the user to
a fully raised position. To ensure lift functionality during a power outage, a battery
backup system must be purchased separately. Contact your La-Z-Boy
more information. Replace the power supply batteries every six months and after
each power failure use.
Battery Backup Assembly Instructions
The performance of the built-in battery backup cannot be guaranteed. If you require continuing use
during a power outage, you should purchase a separate battery backup system. Contact your
La Z Boy ® dealer for more information.
The operating speed is reduced when operating on battery backup.
Always maintain constant, even pressure on the button when operating on battery backup to reduce
energy consumption.
The built-in battery backup is located in the power supply and uses two 9-volt alkaline batteries
(not included).
1. Unplug the power supply from the electrical outlet and disconnect the power supply connection
at the base of the chair.
2. The battery compartment is located on the side of the power supply. Slide the battery cover up to
access the battery compartment.
3. Place the connection caps over the battery terminals on each battery. Place the batteries in the
compartment, taking care not to damage any wires.
4. Slide the battery cover over the compartment.
5. Proceed to the Operating Instructions.
Bronze Luxury-Lift Power Recliner Power Supply Specifications:
®
Input: 100–240V.A.C. 50/60Hz. 3.0A
Output: 29V
Power Recliner
®
® dealer for
Power Supply
Battery
Cover
(2) 9-Volt Alkaline Batteries
2.0A
11