Tabla de contenido
Idiomas disponibles
Idiomas disponibles
!
Notice
Do not disassemble the piston
assembly. Components are secured at
the factory with Loctite 277.
Unscrew connector (28) from the rod
as required.
Clean and inspect
!
Notice
Do not separate the adapter from
the tube. Components are secured at the
factory with Loctite 277. The washer
between the two components is set
to float.
1 Clean all metal parts in an environmen-
tally safe cleaning solvent.
2 Inspect all parts for wear and/or damage.
3 Replace as necessary.
4 Inspect the bore of cylinder assembly (1)
for score marks.
Lubricated components
Item no.
Description
Clean oil
3
O-Ring,
/
in. (6 mm) ID x
1
4
9
Packing
Viscous H lubricant
1
Cylinder, bore
5 Make sure the spring is not loose or
broken.
!
Notice
Use the appropriate repair kit for
replacement parts.
6 Inspect the wear surface of piston
assembly (22, 23) or rod (27) closely for
score marks.
7 Replace as necessary.
Item no.
/
in. (11 mm) OD
17
7
16
18
b
9
Description
O-Ring, 1
/
in. (49 mm) ID x 2
15
16
Packing, Block-V
O-Ring, 1
/
in. (41 mm) ID x 2 in. (51 mm) OD
5
8
Packing, outside diameter
15
/
in. (54 mm) OD
1
8
Table 2
Tabla de contenido
