Setting Operating Mode - Steren PBX-100 Manual De Instrucciones

3.4 Setting operating mode

3.4.1 Setting auto-attendant mode for all the lines
- Format: 10#
- Description: Allows to enable the auto-attendant mode, the person
who call will hear a OMG recorded message, while all the extensions
are in MUTE mode.
In programming
Dial 10# Listen a tone Hang up
mode
If the caller doesn't know the number extension, can ask to the
operator dialing "0".
-Outgoing message must be record when the mode is set.
3.4.2 Setting operator mode for all the lines
- Format: 11#
- Description: Allows to enable all the lines in Operator mode. In this
mode, when there is a incoming call, all the extensions will ring,
indicating there is a new call.
12