Care And Cleaning - Homewerks 7107-03HW Manual Del Usuario

INSTALLATION INSTRUCTIONS (Continued)
14. Connect a 4 in. circular duct to the fan housing (A), securing it
with duct tape or a clamp. Vent the duct to the outside.
15. Attach the grille (B) by pinching the mounting springs and
inserting into the narrow rectangular slots in the fan
housing (A).
Turn on the power source. Check the fan for any abnormal
sounds or vibrations.

CARE AND CLEANING

CAUTION: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the
fuse from the fuse box.
• See safety information before proceeding. Routine maintenance should be done at least once a year.
• Never use solvents, thinner or harsh chemicals for cleaning the fan.
• Do not allow water to enter the motor.
• Do not immerse metal parts in water.
• Do not immerse resin parts in water over 140 degrees Fahrenheit.
WARNING: RISK OF ELECTRIC SHOCK! Ensure the electricity is
shut off. Either remove the fuse or turn off the circuit breaker before
cleaning.
1. Squeeze the mounting springs and pull the grille (B) down from
the fan housing (A). Wipe grille (B) with a damp cloth.
Homewerks.com
14
15
Mounting
springs
1
Mounting
springs
9
A
B
A
B