SEVERIN WK 3422 Instrucciones De Uso página 12

∙ When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
∙ Do not touch the plug with wet
hands.
∙ The electrical connections in the base
must be protected at all times against
possible contact with water.
∙ Do not clean the water container
and the base with liquids and do not
immerse them; do not clean under
running water.
∙ The kettle may only be operated with
the base provided with the appliance.
∙ Never remove the water container
from the base (or replace it) while the
appliance is switched on.
Danger of burns and scalding
∙ The exterior surfaces become hot
during use and will remain so for some
time afterwards.
∙ Allow the appliance to cool down
sufficiently before inserting or
removing the tea filter.
∙ Do not leave the kettle unattended
during operation. Use only pure
water when filling the container to the
desired level, observing the Min.
(0.5 l) and Max. (1.0 l for tea or 1.7 l
for water only) markings. Overfilling
the container may cause danger if
boiling water is forced out.
∙ For boiling water only, always remove
the tea filter.
∙ Do not exceed to 70 °C when re-
heating tea. Caution: Do not bring to
a boil, as the liquid may foam over.
12
∙ Also beware of the danger of scalding
from hot steam being emitted.
Therefore, do not touch any parts of
the appliance except the handle during
use.
∙ During the boiling process and when
pouring out hot water, the lid must be
kept closed at all times.
∙ Allow the water container to cool down
before refilling.
Lack of hygiene
Lack of hygiene may result in germs
forming inside the appliance:
∙ Clean the appliance thoroughly before
using it for the first time.
∙ Before cleaning the appliance,
ensure it is disconnected from the
power supply and has cooled down
completely.
∙ The appliance must be descaled at
regular intervals. Clean the water
container as necessary with a damp
cloth.
∙ Detailed information on cleaning the
appliance can be found in the section
Cleaning and care.
Danger of damage to the unit
Incorrect handling of the appliance can
cause damage:
∙ Always let the appliance cool
down first before re-filling with
fresh water.
∙ Always place the unit on a dry,
level, non-slip and heat-resistant
surface, which is impervious to
contact with the rubber feet.