Setting Language - Insignia IS-TV040926 Manual Del Usuario

SETTING LANGUAGE

This TV can display the on-screen language in English, Spanish or French.
On-screen language selection (step 3) will automatically appear on the screen when you press the MENU button initially.
Select the language you prefer first, then proceed with the other menu options.
1
Press the MENU button.
2
Press the CH or
to select the "LANGUAGE"
mode, then press the ENTER
button.
NOTE:
If Spanish or French is chosen, the Closed Caption indicators will be in the selected language, but the Closed Caption text
will not be affected by the language selection.
TV OPERATION
1 To turn on the TV, press the POWER button.
2
The VOLUME can be adjusted to a desired level by
pressing the VOL
The sound level will be indicated on the TV screen by
green bars and a number. As the sound level increases,
so do the number of bars and the number on the screen.
The same is true for decreasing the level.
3
Set the TV/CATV menu option to the appropriate
position. When shipped from the factory, this menu
option is in the CABLE TV setting. See "TO MEMO-
RIZE CHANNELS".
TV - VHF/UHF channels
CATV - CABLE TV channels
4
CH and buttons
Press and release the CH
automatically stops at the next channel set into
memory. Press and hold the button down to change
channels more quickly.
For proper operation, before selecting channels,
they should be set into the TV's memory.
See "TO MEMORIZE CHANNELS".
8
3S90431A [E] P02-08
MENU
CH SETUP
PICTURE
AUDIO
LANGUAGE/IDIOMA/LANGUE
V-CHIP SET
button
/ /ENTER/MENU/EXIT
or button.
or button. The channel
8
3
Press the CH or button to
select the desired language:
English (ENGLISH), Spanish
(ESPAÑOL) or French
(FRANCAIS), then press the
ENTER button.
4
Press the EXIT button to return to normal TV viewing.
Direct Channel Selection buttons (0-9)
Press these buttons to select a channel. The channel
number will appear on the upper right corner of the TV
screen. If an invalid channel number is selected, the display
will revert to the original channel.
TV Mode Direct Channel Selection
When the TV/CATV menu option is in the TV position, all
channels can be instantly selected by using two buttons.
(For example, to select channel 2, press "0", then "2". If you
press only "2", channel selection will be delayed for a few
seconds). For channels 10 and above, press the 2 digits in
order.
CATV Mode Direct Channel Selection
When the TV/CATV menu option is in the CATV position,
channels can be selected as follows:
CH. 1-9 Press "0" twice, then 1-9 as needed.
Example, to select channel 2, press
"002".
CH. 10-12 Press "0", then remaining 2 digits.
Example, to select channel 12, press
"012".
CH. 13-99 Press the 2 digits in order.
Example, to select channel 36, press
"36".
CH. 100-125 Press the 3 digits in order.
Example, to select channel 120, press
"120".
NOTE: If the station being viewed stops broadcasting, the
TV will automatically shut off after 15 minutes.
3/8/05, 18:28
/ /ENTER/MENU/EXIT