Saving, Retrieving And Deleting Results; Cleaning And Storing The Instrument - Beurer medical BC 16 Instrucciones Para El Uso

Table for classification of blood pressure values (unit of measurement mmhg) for adults:
Range
Hypotonia (degraded blood pressure)
Normal range
Pre-hypertensive blood pressure range*
High blood pressure - degree
High blood pressure - degree
(*) Blood pressure range that might transfer to high blood pressure
The WHO classification in the display shows the range of
the measured blood pressure.
If the values for systolic and diastolic pressure are in two
different WHO ranges (e.g. systolic in the grade
sion range and diastolic pressure in the normal range), the
WHO classification on the unit always indicates the higher
range (grade hypertension in the example described).

6. saving, retrieving and deleting results

The computer automatically saves the blood pressure read-
ings of the last 50 measurements. When the 50 memory lo-
cations are exceeded, the current oldest value is deleted.
You can display the memory as follows:
• Press the „User-Switching key"
ry zone, and press the „M" key to switch from memory to
memory with sequence numbers.
• The saved measured values are continuously stored.
systolic
lower than 105
between 105 and 120
between 120 and 140
between 140 and 160
higher than 160
• Press the On/Off switch
• If you forget to switch off the computer, it will switch off
automatically after 1 minute.
hyperten-
Press the „User-Switching key"
zone, then press and hold the „M" key for approximately
5-seconds to clear the data in the pre-designated memory
zone. The data in both memory zones – zone 1 and zone 2
may be erased if any of the batteries is removed.

7. Cleaning and storing the instrument

• Clean your blood pressure computer carefully using only a slightly moistened cloth.
• Do not use any detergents or solvents.
to select a memo-
• Never hold the instrument under water as otherwise liquid
can penetrate and damage the instrument.
• Never place any heavy objects on the instrument.
16
Diastolic Action
lower than 60 Check with doctor
between 60 and 80 Self check
between 80 and 90 Check with doctor
between 90 and 100 Consult your doctor
higher than 100 Consult your doctor
to turn the unit off.
Adapted from JNC 2003
to select a memory