Tabla de contenido
Idiomas disponibles
Idiomas disponibles
NOTE: Holes for mounting brackets are marked and drilled only after liftgate is in correct
position on the pickup bed.
NOTE: To avoid interference, install aftermarket hitch receiver before liftgate.
1. Position the LH and RH mounting brackets
(Kit items) in the pickup bed just forward
of corner posts (FIG. 12-1).
2. Position liftgate in the rear opening of the
pickup bed (FIG. 12-1).
pickup bed
spare tire tube on truck
pickup bed
NOTE: Ensure nuts and lock washers
are on the inboard side of the
mounting brackets.
3. Bolt the main frame brackets on liftgate,
to the RH mounting brackets as shown
in FIG. 12-1. Handtighten bolts and nuts.
Repeat for LH mounting bracket.
4. Allow the Liftgate to hang supported
by the corner posts.
LIFT CORPORATION Sht. 12 of 52 DSG#
INSTALLING LIFTGATE
RH MOUNTING
BRACKET
MAIN FRAME
LH BRACKET
BOLTING LIFTGATE TO RH
MOUNTING BRACKET
M-14-28
Rev. D Date: 08/13/19
CORNER
POST
3/8"-16 X 1" LG BOLT
3/8" LOCK WASHER
3/8"-16 NUT
(3 PLACES)
LIFTGATE
FIG. 12-1
MAIN FRAME
RH BRACKET
Tabla de contenido
