Maxon T-500 Manual De Instrucciones página 11

NOTE: Change the taillight mounting screws before installing the liftgate. The new
screws will allow both taillight lenses to be removed after the liftgate is installed.
1. Remove 2 original Torx-head taillight
screws from RH taillight (FIG. 11-1).
These screws are not needed after the
taillight screws are changed.
2. Install 2 M6 X 16mm hex head screws
(Kit item) to secure RH taillight to pickup
bed (FIG. 11-1).
3. Repeat steps 1 and 2 to change the LH
taillight screws (FIG. 11-1).
LIFT CORPORATION Sht. 11 of 52 DSG#
CHANGING TAILLIGHT MOUNTING SCREWS
M-14-28
TAILLIGHT
SCREWS
TAILLIGHT MOUNTING SCREWS
(RH TAILLIGHT SHOWN)
Rev. D Date: 08/13/19
RH TAILLIGHT
FIG. 11-1