Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5
Restart button
LED Indicators
Status LED
Green
Amber
Red
Network LED
Green
Amber
Unlit
Power LED
Green
Amber
Connectors and Buttons
For specifications and operating conditions, see page 15.
BNC Connector
Each video input is terminated using a coax/BNC connector.
Connect a 75 Ohm coaxial video cable; the recommended maximum length is 250 m (800 ft).
Note
75 Ohm video termination can be enabled/disabled for the video input through the
product's web page at Video > Camera Settings > Video termination. Video termination is
enabled on factory default. If the product is connected in parallel with other equipment,
for optimum video quality, it is recommended that video termination is enabled only for
the last device in the video signal chain.
AXIS M7016 Video Encoder
Indication
Steady green for normal operation.
Steady during startup. Flashes when restoring settings.
Flashes red for firmware upgrade failure.
Indication
Steady for connection to a 1 Gbit/s network. Flashes for network
activity.
Steady for connection to a 10/100 Mbit/s network. Flashes for
network activity.
No network connection.
Indication
Normal operation.
Flashes green/amber during firmware upgrade.
13
EN
Tabla de contenido
