Fig. 7
7. Spread a thin layer of glue in the dowel holes in the Center Leg (Ob) and Left Front Leg (Mb)
and insert the Long Sleeper (Ib). Spread a thin layer of glue in the dowel holes in the Right
Front Leg (Pb) and insert the Short Sleeper (Jb). Gently tap with a padded hammer and
quickly wipe away any excess glue. Using the pocket drilled holes as guides, securely affix legs
to sleepers with four #8x1¼" Pan Head Screws (ZK). See Figure 7.
Fig. 8
8. Spread a thin layer of glue in the dowel holes in the front leg assembly and attach to dowels as
shown in Figure 8. Gently tap with a padded hammer and quickly wipe up any excess glue. Using
the pocket drilled holes as guides, securely affix assemblies using six #8 x 1¼" Pan Head Screws
(ZK). See Figure 8.
9. Turn your table upright. Insert Drawer (Gb) and Keyboard Tray (Hb).
Mb
ZK
Ib
ZK
ZK
ZK
ZK
Pb
Ob
ZK
Jb
ZK
ZK
Page 7 – 636Wb – Rev. 10/08
