Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Model #
975Wc
Scrapbooking Cart
Assembly Instructions
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading both the Assembly Instructions and
Finishing Hints before you begin your project.
For normal household use only.
recommended for commercial use.
Do not climb, sit or stand on this piece of
furniture.
Unload items from this unit prior to moving.
Do not overload drawers on this unit.
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
parts which are defective, missing or
damaged during assembly. Please contact
Whittier Wood Products customer service
department directly (by phone, fax, mail or
email) for replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number (upper left corner of this
page), part letter/number, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • www.whittierwood.com
Fax: 541-687-2060 • www.whittierwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Read both the Assembly Instructions and Finishing
Hints completely before beginning your project.
Store the parts: 1) in their box; 2) in a dry place;
3) in temperatures ranging from 40° to 90°.
(Not on a cold, possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
affect the stability of your furniture. Tighten or
repair as needed.
Production Code:
BZ
We will replace any
Rev. 8/08
Tabla de contenido
Manuales relacionados para Whittier Wood Furniture 975Wc
Resumen de contenidos para Whittier Wood Furniture 975Wc
- Página 1 Model # 975Wc Scrapbooking Cart Service Policy: We will replace any parts which are defective, missing or Assembly Instructions damaged during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or email) for replacement parts.
- Página 2 B — 4x30mm Phillips Dowel — Qty. 22 Screw — Qty. 66 E — Caster — Qty. 4 D — 3x16mm Phillips Cc — 3.5x16mm Phillips Screw — Qty. 16 Screw — Qty. 16 975Wc – Page 2 – Rev. 8/08...
-
Página 3: Tools Required
(see figure 2b) and the back edge of the Lower Back Sleeper (Rc) should be flush with the groove in the back of the Left Side (Fc). Use four 4x30mm Phillips Screws (B) through pocket drilled holes. See Figure 2. 975WC – Page 3 – Rev. 8/08... - Página 4 4. Fasten Top (Ic) in place with six 4x30mm Phillips Screws (B) through the pre-drilled holes in the cleats. See Figures 4 and 4a. Make sure the groove in the back of the Top (Ic) aligns with the groove in the back edge of each side. 975Wc – Page 4 – Rev. 08/08...
- Página 5 Fig. 6 Cc x 4 6. Attach a Caster (E) in each corner using four 3.5x16mm Phillips Screw (Cc) through the pre-drilled holes in the bottom of the unit. See Figures 6 and 6a. 975Wc – Page 5 – Rev. 08/08...
- Página 6 Slide a Drawer Botttom (Mc) into the grooves (see Figure 7b) and attach the Large Drawer End (Lc) with six 4x30mm Phillips Screws (B). See Figure 7c. Fig. 8 8. Insert large drawer into unit. See Figure 8. 975Wc– Page 6– Rev. 08/08...
- Página 7 (Mc) into the grooves (see Figure 9b) and attach the Small Drawer End (Oc) with four 4x30mm Phillips Screws (B). See Figure 9c. Fig. 10 Fig. 10a 10. Insert drawers into unit. See Figures 10 and 10a. 975Wc – Page 7 – Rev. 08/08...
- Página 8 Modelo # 975Wc Carrito de Múltiples Cajones Normas para obtener servicio: Reemplaza- remos las piezas que tengan defectos, falten o se Instrucciones para Armar dañen durante el armado. Sírvase comunicarse con el departamento de servicio al cliente de Whittier Wood Products directamente (por teléfono, fax, correo o e-mail) para obtener piezas de repuesto.
-
Página 9: 975Wc Carrito De Múltiples Cajones
Cerciórese de que la ranura de la parte posterior del tablero (Ic) queda alineada con las ranuras en los bordes posteriores de cada panel lateral. Vea los 975Wc SP – Page 2 – Rev. 08/08 figuras 4 y 4a. - Página 10 No. de modèle 975Wc Chariot de Découpures Politique de service : Nous remplacerons Instructions de Montage toutes les pièces défectueuses, manquantes ou endommagées pendant le montage. Veuillez con- tacter directement le service clientèle de Whittier Wood Products (par téléphone, fax, courrier ou e-mail) pour obtenir les pièces de remplacement.
-
Página 11: 975Wc Chariot De Découpures
10. Insérez les tiroirs (x 5). Voir Figures 10 et 10a. que la rainure située à l’arrière du dessus (Ic) est alignée avec lesrainures situées dans les bords arrières de chaque côté. 975Wc FR – Page 2 – Rev. 08/08... - Página 12 1. Choose a finish that will meet your expectations for the product you are finishing. Are you matching existing furniture or do you want a “natural” finish? Is the piece to be functional, decorative or both? The answers Rubber gloves to these questions may affect the type of finish you choose.
- Página 13 Gluing Hints (cont.) 3. We recommend that you use a good wood glue, such as Elmer’s Wood Glue or White Glue, Tite- bond Wood Glue or the equivalent; unless the instructions call for a special type such as a slow drying epoxy glue.