Enlaces rápidos

Model #
558W
Westport
Storage Shelf
Assembly Instructions
Congratulations!
This fine piece of furiture will make a handsome
addition to your home. For the best results, start by
reading the Assembly Instructions and Finishing Hints
before you begin your project.
For normal household use only.
recommended for commercial use.
Do not climb or stand on this piece of
furniture.
Unload items from this unit prior to moving.
Do not overload this unit.
Before loading or moving this unit, check all screws
and supports for tightness.
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
parts which are defective, missing or
damaged during assembly. Please contact
Whittier Wood Products customer service
department directly (by phone, fax, mail or
email) for replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number (upper left corner of this
page), part letter/number, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
O O u u t t s s ide
ide U U . . S. or Canada:
S. or Canada: 5 5 4 4 1 1 - - 6 6 8 8 7 7 - - 0 0 2 2 1 1 3 3
F F a a x: x: 5 5 4 4 1 1 - - 6 6 8 8 7 7 - - 2 2 0 0 6 6 0 •
0 • www
M M a a i i l l : : P P .O .O. . B B o o x 28
x 282 2 7 •
7 • E E ugen
Completely read the Assembly Instructions and
Finishing Hints before beginning your project.
Store the parts: 1) in their box; 2) in a dry place;
3) in temperatures ranging from 40° to 90°. (Not on
a cold, possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joi
nts or screws, or any other problem which may
affect the stability of your furniture. Tighten or
repair as needed.
Production Code:
VN
We will replace any
www. . w w h h i i t t t t ie ier r w w oo
ood d . . c c om
om
ugene e , , O O r r egon
egon 9 9 7 7 4 4 0 0 2, 2, U U . . S S . . A A . .
01/09
Tabla de contenido
loading

Resumen de contenidos para Whittier Wood Furniture 558W

  • Página 1 Model # 558W Westport Storage Shelf Service Policy: We will replace any parts which are defective, missing or Assembly Instructions damaged during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or email) for replacement parts.
  • Página 2 558W Westport Storage Shelf — Parts Before beginning assembly, identify parts and make sure quantities received match what’s on list. If you need to replace a part, please refer to following list for name and letter. A — Top Assembly — Qty. 1 B —...
  • Página 3: Tools Required

    Left Side (C) to the Bottom Shelf Assembly with two 4x32mm Pan Head Screws (M), making sure the square notches on the Left and Right Dividers face the back and the curved notch on the Left Side faces the front. See Figure 2. 558W — 01/09 — Page 3...
  • Página 4 Assembly (G) as shown in Figures 4 and 4a. Quickly wipe away any excess glue. Using the pocket holes as guides, attach using four 4x32mm Pan Head Screws (M). See Figures 4, 4a and 4b. 558W — 01/09 — Page 4...
  • Página 5 3x12mm Pan Head Screws (L). Using the predrilled holes as guides, attach the five Small Hooks (I) to the bottom of the shelf assembly with five 3x12mm Pan Head Screws (L). See Figures 6 and 6a. 558W — 01/09 — Page 5...
  • Página 6 Using a tape measure, measure up 15 inches from that line. Draw another faint line. The top line is where you will attach the Wall Brackets (K). Erase the faint bottom pencil mark. See Figure 8. 558W — 01/09 — Page 6...
  • Página 7 10. NOTE: The Wall Brackets (K) attached to the wall angle out at the top. See Figure 10. When you hang your storage shelf, the Wall Brackets (K) that are pre-attached to the shelf fit over the angled part of the Wall Brackets on the wall. See Figure 10a. 558W — 01/09 — Page 7...
  • Página 8 Angle Bracket (R) to the storage shelf with two 4x32mm Pan Head Screws (M). Replace the storage shelf on to the wall and secure the Angle Bracket to the wall with two 4x32mm Pan Head Screws (M). See Figure 11. 558W — 01/09 — Page 8...
  • Página 9: Estante Para Almacenaje Westport

    Modelo No. 558W Estante para Normas para obtener servicio: Reemplaza- Almacenaje Westport remos las piezas que tengan defectos, falten o se dañen durante el armado. Sírvase comunicarse con el departamento de servicio al cliente de Whittier Wood Products directamente (por teléfono, fax, correo o e-mail) para obtener piezas de repuesto.
  • Página 10: 558W Estante Para Almacenaje Westport

    Vea la Figura 2. tornillos de cabeza troncocónica 4x32mm (M). Vea la Figura 1. Page 2 SP — 558W — 01/09...
  • Página 11 (G) al conjunto del marco con tornillos pared con dos tornillos de cabeza troncocónica 4x32mm (M). de cabeza troncocónica 4x22mm (O). Vea la Figura 7. Vea la Figura 11. Page 3 SP — 558W — 01/09...
  • Página 12: Étagères De Rangement Westport

    No. de modèle 558W Étagères de Politique de service : Rangement Westport Nous remplacerons toutes les pièces défectueuses, manquantes ou endommagées pendant le montage. Veuillez con- tacter directement le service clientèle de Whittier Instructions de Montage Wood Products (par téléphone, fax, courrier ou e-mail) pour obtenir les pièces de remplacement.
  • Página 13: 558W Étagères De Rangement Westport

    En vous servant des petits trous sont face à l’avant. Voir la figure 2. forés comme guides, fixez-les solidement au moyen de quatre vis à tête cylindrique 4x32mm (M). Voir la figure 1. Page 2 FR — 558W — 01/09...
  • Página 14 à tête cylindrique 4x22mm (O). Voir la figure 7. deux vis à tête cylindrique 4x32mm (M). Voir la figure 11. Page 3 Fr — 558W — 01/09...
  • Página 15 1. Choose a finish that will meet your expectations for the product you are finishing. Are you matching existing furniture or do you want a “natural” finish? Is the piece to be functional, decorative or both? The answers Rubber gloves to these questions may affect the type of finish you choose.
  • Página 16 Gluing Hints (cont.) 3. We recommend that you use a good wood glue, such as Elmer’s Wood Glue or White Glue, Tite- bond Wood Glue or the equivalent; unless the instructions call for a special type such as a slow drying epoxy glue.

Tabla de contenido