Enlaces rápidos
Model #
637Wa
Mission Hutch
Assembly Instructions
DESIGNED TO BE USED
WITH 636Wa MISSION DESK
(636Wa Sold Separately)
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading both the Assembly Instructions and
Finishing Hints before you begin your project.
For normal household use only.
recommended for commercial use.
Do not climb, sit or stand on this piece of
furniture.
Unload items from this unit prior to moving.
Do not overload shelves on this unit.
Before loading or moving this unit, check all screws
and supports for tightness.
For maximum stability, attach unit to the wall using
the enclosed hardware as per instructions.
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
which are defective, missing or damaged
during assembly. Please contact Whittier
Wood Products customer service department
directly (by phone, fax, mail or email) for
replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number (upper left corner of this
page), part letter, production code, quantity
needed, reason for replacement and your full
name and address along with a telephone
number in case we need to contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
O O u u t t s s ide
ide U U . . S. or Canada:
S. or Canada: 5 5 4 4 1 1 - - 6 6 8 8 7 7 - - 0 0 2 2 1 1 3 3
F F a a x: x: 5 5 4 4 1 1 - - 6 6 8 8 7 7 - - 2 2 0 0 6 6 0 •
0 • w ww
M M a a i i l l : : P P .O .O. . B B o o x 28
x 282 2 7 •
7 • E E ugen
Read both the Assembly Instructions and Finishing
Hints completely before beginning.
Store the parts: 1) in their box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
be affecting the stability of your furniture. Tighten or
repair as needed.
Production Code:
VN
We will replace any parts
w ww . . w w h h i i t t t t ie ier r w w oo
ood d . . c c om
om
ugene e , , O O r r egon
egon 9 9 7 7 4 4 0 0 2, 2, U U . . S S . . A A . .
Rev. 8/07
Manuales relacionados para Whittier Wood Furniture Mission 637Wa
Resumen de contenidos para Whittier Wood Furniture Mission 637Wa
- Página 1 Model # 637Wa Mission Hutch Assembly Instructions Service Policy: We will replace any parts which are defective, missing or damaged during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or email) for replacement parts. Hours: Our friendly customer service staff can be reached Monday-Friday 7:00 a.m.
- Página 2 637Wa Mission Hutch — Parts List BEFORE BEGINNING ASSEMBLY, check that the quantities of the parts received match those on the parts list below. Ba — Left Vertical Divider — Qty. 1 A — Left Side Panel — Qty. 1 Ca —...
- Página 3 637Wa Mission Hutch — Parts List(cont) BEFORE BEGINNING ASSEMBLY, check that the quantities of the parts received match those on the parts list below. M — #8x1⅝" Black K — Cam Connector — Qty. 4 L — Cam Housing — Qty. 4 Screw —...
- Página 4 K x 4 FIG. 2 Read the instructions on how to operate CAM-LOCK SYSTEM at this time. 2) Install four Cam Connectors (K) in bottom of Top (H). See FIGURE 2. FIG. 3 Glue the four Shelf Dividers (Ea) to the Upper Shelves (Fa). See FIGURE 3. FIG.
- Página 5 M x 2 FIG. 5 With the towers standing upright, attach the Shelf Support (I) between the towers using a #8x1⅝" Black Screw (M) through the predrilled holes in the Left and Right Vertical Dividers (Ba & Ca) . Pro- filed edge of support must face down.
- Página 6 N x 14 O x 2 P x 8 637W Hutch 636W FIG. 7A Desk FIG. 7B Turn unit face down on a clean protected surface; measure from top left to bottom right ( and from top right to bottom left ( ).
- Página 7 Modelo # 637Wa Estantería Unidad de Normas para obtener servicio: Reemplaza- estantes Mission remos las piezas que tengan defectos, falten o se dañen durante el armado. Sírvase comunicarse con Instrucciones para Armar el departamento de servicio al cliente de Whittier Wood Products directamente (por teléfono, fax, correo o e-mail) para obtener piezas de repuesto.
- Página 8 637Wa Estantería Unidad de estantes Mission LISTA DE PIEZAS ANTES DE COMENZAR A ENSAMBLAR LA ESTANTERÍA: Verifique que la cantidad de piezas recibidas concuerde con lo indicado en la lista que figura a continuación. Cantidad Cantidad Cantidad Panel lateral izquierdo Panel superior Placa de unión .
- Página 9 No. de modèle 637Wa Huche Mission Politique de service : Nous remplacerons toutes Instructions de Montage les pièces défectueuses, manquantes ou endom- magées pendant le montage. Veuillez contacter directement le service clientèle de Whittier Wood Products (par téléphone, fax, courrier ou e-mail) pour obtenir les pièces de remplacement.
- Página 10 637Wa Huche Mission Liste des pièces AVANT DE COMMENCER LE MONTAGE : Assurez-vous que les quantités des pièces reçues correspondent à la nomenclature des pièces figurant ci-dessous. Quantité Quantité Quantité Panneau gauche ..Dessus .