Turning On And Off; Volume Control; Pairing With A Bluetooth Device - Trevi X-DJ 1301 PRO Manual Del Usuario

ENGLISH

TURNING ON AND OFF

Press and hold the
Press and hold the
Auto Turn off: after a certain idle time the HiFi headphones are automatically switched off. To reactivate them, turn on
the headset.

VOLUME CONTROL

You can adjust the sound volume with the volume keys.
1. Press more times the
2. Press more times the
CABLE CONNECTION TO AN EXTERNAL DEVICE
You can use the headset like regular headphones HiFi multifunction connecting cable to an external device equipped
with a headphone jack using the cable supplied stereo Jack-Jack:
1. A headset turned off connect the audio cable to the headphone jack into the AUX IN jack (4), connect the other
plug of the cable into the jack HEADPHONES of the device;
2. Turn on the external device and start playback sound.

PAIRING WITH A BLUETOOTH DEVICE

1. Turn on the unit;
2. Press more times the M key (8) until the message "Bluetooth Mode". The indicator LED (5) will turn Red/blue and
start blinking;
3. Enable the Bluetooth connection on the external device (phone, tablet, etc ...) by referring to its manual;
4. From the external device search for devices and select "X-DJ1301PRO";
5. When the connection with the external device will be done you can listen "Connected".
Note: A paired device, it may happen that the connection is interrupted (such as when the devices connected via
Bluetooth stray too far from each other); Normally the connection is automatically restored, otherwise it is necessary
to carry out the procedure again coupling from step 1 to 5.
Whenever you want to pair your headset to a new device, you must disconnect the headphones (if connected) from
the old device and pairing repeating the above procedure from step 1 to step 5.
During pairing the two devices must be placed at a distance less than one meter, in normal use, the maximum distan-
ce for a correct operation is about 8 meters.
MANAGEMENT OF MUSICAL REPRODUCTION
With the keys on the headset you can control playback of the songs on the paired device.
Once paired the headset to the device, enter the music playback.
the following commands you can perform:

- Press the button (7) to play or pause the song;
9
- Long press the /V+
:
- Press and hold the
Note: Due to the continuous evolution of Bluetooth technology, some devices may not be compatible or fully com-
patible with the appliance TREVI X-DJ1301PRO.
CALL HANDLING ON MOBILE PHONE
Through headphones they can operate various operations while receiving calls on mobile phone:
Answering a call: Press once on the
Ending a call: Press once

/ button (7) to turn the unit. You will hear the voice message "Bluetooth mode".

/ button (7) to switch off the set. You will hear the voice message "Power OFF".
9
/V+ button (1) to increase the volume.
:
/V- button (2) to decrease the volume.
(1) button to move to the next track;
/V- (2) button to move to the previous track.

button (7) to start the conversation;

button (7) to end a conversation;
PAG.6
X-DJ 1301 PRO