Description Of Controls; Power On/Off - Trevi DJ 1230 BT Guia Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

ENGLISH

DESCRIPTION OF CONTROLS

4
1. On / off / play / pause button
2. Micro USB port for charging
3. LED indicator
4. Microphone
BATTERY RECHARGE OPERATION
The headphones have a rechargeable battery inside.To recharge:
- Connect the supplied microUSB cable to an external device equipped with USB socket (computer, tablet ...) or to a
power adaptor with USB 5V 1A (not supplied).
- Connect the supplied microUSB cable to the headphones in the appropriate connector (2); during the recharging
phase the LED indicator (3) will turn red.
- When charging is complete, the LED indicator (3) will switch off.
Indication of the battery being exhausted:
- When the battery is being eased, the guide voice will indicate "Battery low" and the headset will turn off after a
short time.

POWER ON/OFF

- Press and hold the on / off button (1) to switch on the appliance, the guide item will indicate "Bluetooth mode". In
case of power on without pairing, the headphone will automatically turn off after about 5 minutes.
- Press and hold the on / off button (1) to switch off the appliance, the guide item will indicate "Power OFF".
COUPLING WITH A BLUETOOTH DEVICE
1. Switch on the appliance. The LED indicator (3) will start to flash alternating red and blue.
2. Enable the Bluetooth® connection of the external device (Smartphone, Tablet, etc ...) referring to its manual.
3. From the external device, search for devices and select "DJ 1230 BT"; if required, enter the code "0000".
4. When the coupling with the external device has occurred, the guide voice will indicate "Connected" and the LED
(3) will flash blue.
VOLUME ADJUSTMENT
You can adjust the volume of the audio from the external device (Smartphone, Tablet, etc ...) by adjusting the volume.
MUSIC MANAGEMENT
After pairing the headphones to the device, activate music playback from the external device.
You will be able to run the following commands:
- Press the PLAY / PAUSE (1) button to play or pause the song.
- Press the PLAY / PAUSE button (1) twice quickly to switch to the next track.
Note: Due to the continuing evolution of Bluetooth® technology, some devices may not be compatible or fully
compatible with the TREVI DJ123O BT.
To avoid possible hearing damage, limit the time listening at high
volumes.
3
2
PAG.6
1
DJ 1230 BT
Tabla de contenido
loading

Tabla de contenido