Charging The Battery; Switching On And Off; Pairing With A Bluetooth Device - Trevi DJ 12E50 BT Manual Del Usuario

ENGLISH
All manuals and user guides at all-guides.com
To avoid possible hearing damage, limit the time listening at high
volumes.
DESCRIPTION OF CONTROLS AND ACCESSORIES
1. Power button on / off / play / pause
2. NEXT button, the next track / volume increase
3. PREV button, previous track / volume down
4. MicroUSB port for charging
5. LED indicator
6. AUX IN
7. Microphone
Accessories: Jack / Jack stereo cable for connection to devices with Audio Out jack, micro USB cable to charge the
headset multifunction HiFi to devices with USB ports.

CHARGING THE BATTERY

Multifunction HiFi headphones have an internal rechargeable battery.
Charge the battery:
- Connect the micro USB cable supplied to an external device equipped with a USB socket (computer, tablet ...) or
a power supply with 5V
- Connect the microUSB cable supplied with HiFi headphones into the connector (4); during charging the LED
indicator (5) will turn red.
- When charging is completed the LED indicator (5) will turn off.
- When the battery is 20% charged, the headset HiFi will issue a vocal warning.

SWITCHING ON AND OFF

Press and hold the On / Off button (1) to turn the unit. You will hear the voice message "Power on".
Press and hold the On / Off button (1) to switch off the set. You will hear the voice message "Power OFF".

PAIRING WITH A BLUETOOTH DEVICE

1. Turn on the unit. The LED indicator (5) will start to flash alternately red and blue.
2. Enable the Bluetooth connection of the external device (Smartphone, Tablet, etc. ...) referring to its manual.
3. From the external device to perform a search of devices and select "DJ 12E50 BT"; If prompted, type the code
"0000".
4. When the connection with the external device will place the LED (5) will turn blue.
Note: A paired device, it may happen that the connection is interrupted (such as when the devices connected via Bluetooth
stray too far from each other); Normally the connection is automatically restored, otherwise it is necessary to perform the
pairing procedure again from step 1 to 4.
Whenever you want to pair your headset to a new device, you need to make a new pair by repeating the above procedure from
step 1 to step 4.
During pairing the two devices must be placed at a distance less than one meter, in normal use, the maximum distance for
proper operation is about 8 meters.
CABLE CONNECTION TO AN EXTERNAL DEVICE
You can use the headset as normal wired headphones by connecting them to an external device with the Jack / Jack
stereo cable supplied:
1. With headphones turned off, connect a cable to the headphone jack using the AUX IN jack (6), connect the other
jack into the HEADPHONES socket of device.
2. Turn on the external device and start the audio playback.
USB socket (not supplied).
PAG.6
DJ 12E50 BT