Kohler K-T6900 Guia De Instalacion página 7

Valve Stem
Discard plaster
guard with
dome.
Screws
4. Install Face Plate and Handle
CAUTION: Risk of damage to the K-306-KS valve assembly.
When using the K-306-KS HiFlow Valve in a fiberglass or acrylic
installation, use the Thin Wall Installation Kit (88526).
Remove and discard the plaster guard and/or dome, if installed.
Fit the faceplate over the valve, and secure with two screws.
Rotate the valve stem fully counterclockwise.
Lever Handle
Fit the spline adapter into the skirt.
Press the skirt onto the valve stem.
Secure with the screw.
Align the handle, and thread the skirt to the handle.
Square Handle
Remove the shell from the handle.
Remove the insert from the handle body by pressing one corner
of the handle body down, and lifting the opposite corner up.
Press the handle body onto the valve stem.
Secure with the screw.
Snap the insert in place on the handle body.
Thread the shell onto the handle body.
Kohler Co.
Valve
Faceplate
Stem
Skirt
Adapter
7
Handle
Body
Insert
Screw
Shell
Screw
Handle
114495-2-BC