Power Cable - Dexter power YLW6239-DP Instrucciones Legales Y De Seguridad

use
19) Be vigilant
Watch what you are doing, use common sense and do not work when you are tired.
20) Check for damaged parts
Before re-using the machine, it is recommended to carefully check that it is working properly. Check
the alignment
of moving parts, that moving parts are securely fastened, that there are on broken parts, that it is
properly set up
and any other condition which may effect the operation of the machine. Unless otherwise indicated
in the instructions,
it is recommended to repair or replace the guard or any other damaged part, through an authorised
professional.
Defective switches must be replaced professionally. Do not use a machine with a switch which no
longer
controls the starting or stopping of the machine.
21) Warning
The use of any accessory, other than those mentioned in the instructions, may entail a risk of personal
injury.
22) Have the machine repaired by qualified professionals
This electric machine conforms to appropriate safety regulations. It is strongly recommended that
repairs should
be carried out by qualified professionals, using genuine replacement parts; proceeding otherwise
may result in
considerable danger to the user.

23) Power Cable:

If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
24) This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children without
supervision.
Power plug must be removed from the socket-outlet before
cleaning and maintening the appliance.
Caution! Remove the plug from the wall socket before attempting any adjustment, mainte-
nance or repair.
- Always ensure that the machine's ventilation slots are kept clean.
- Cleaning should be done with the help of a dry or slightly damp cloth.
- Grease moving parts periodically.
- Do not use caustic agents to clean plastic.
- All defective parts must be replaced by the manufacturer's after sale service.
601221-2-Safety Manual-J.indd 41 601221-2-Safety Manual-J.indd 41
2. GENERAL SAFETY RULES
Keep these instructions carefully.
3. MAINTENANCE
41
EN
30/06/2020 12:18 30/06/2020 12:18