Before First Use; Operation - Progress PBN 1110 Manual De Instrucciones

Ocultar thumbs Ver también para PBN 1110:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Before first use

Warning! Remove all packaging,
both inside and outside the oven,
before using the oven.
Before the first use, the oven should be heat-
ed while empty.
During this time, an unpleasant odour may be
emitted. This is absolutely normal. It is
caused by manufacturing residues.
Ensure that the kitchen is well ventilated.
1. Turn the oven regulator to Top and bot-
tom heating element
2. Turn the temperature regulator to 250°C.
3. Open a window for ventilation.
4. Allow the oven to run empty for approxi-
mately 45 minutes.
Once this operation is carried out, let the
oven cool down, then clean the oven cavity
with a soft cloth soaked in warm soapy wa-
ter.
Before cooking for the first time, carefully
wash the oven accessories as well.

Operation

Using the oven
Important! Do not lay aluminium foil, or
place baking trays, etc. on the oven floor, as
the heat built up will damage the oven
surface enamel. Always place pans and pots,
ovenproof pans and pots as well as
aluminium trays on the shelf which has been
inserted in the shelf runners. When food is
heated, steam is created, similar to a kettle.
When the steam comes into contact with the
glass in the oven door, it condenses and
creates water droplets.
To reduce condensation, always pre-
heat the empty oven for 10 minutes.
We recommend you wipe the water droplets
away after every cooking process.
Important! Always cook with the oven
door closed.
Always open the oven door carefully. Do not
allow the door to "fall open", support the
door using the door handle, until it is fully
open
The oven has four shelf levels.
To open the oven door, always hold the han-
dle in the centre, until it is fully open.
The shelf positions are counted from the
floor of the oven upwards, as shown in
the figure.
The slide-in components must always
be properly inserted (see figure).
Do not place cookware and pots directly
on the floor of the oven.
Top and bottom heating element
– The middle shelf position allows for the
best heat distribution. If you want a base
browning, simply place the cakes and pas-
tries on to a lower shelf position in the
progress 5
4
3
2
1

Capítulos

Tabla de contenido
loading

Tabla de contenido