Bushnell 119598 Manual De Instrucciones página 5

QUICK START GUIDE: BASIC SETUP STEPS
Step 1: Purchase and activate a SIM card from your mobile phone service provider.
An SMS/MMS (voice+text) enabled SIM card is recommended if you have unlimited
text messaging, as it will minimize costs and allow control of the camera remotely
via text messages. Select a SIM card that also supports data (SMTP or SSMTP) if
you also want the option to receive images from the camera via email through
your data plan.
Step 2: You may need to disable the PIN code on the SIM card, so the camera can
transmit unattended. Insert the SIM card in your smartphone. On iPhones, select
Settings>Phone>SIM PIN. Move the switch to the Off position, and enter the
current PIN for the card. On Android, select Settings>Security>Set up SIM Lock.
Untick Lock SIM card and enter the PIN.
Step 3: Insert the SIM card into the Wireless Trophy Cam HD (slot on top left edge).
Install batteries (12x AA lithium or alkaline) and an SD or SDHC card (up to 32GB).
Attach the antenna by screwing it onto the socket at the top of the camera. Please
refer to the full instruction manual for complete, detailed directions.
Step 4: Set the Power/Mode Switch to "SETUP". You should see the wireless signal
strength indicator bars once a connection has been established (allow time for
this).
Step 5A (MMS Setup): Press the MENU key, then press the LEFT arrow key 3 times
to go to "Wireless Setting". Press the OK key, then select "MMS" (if you are using
an SMS/MMS capable SIM card) and press OK again. Highlight "Auto Setting" and
(1)
press the OK key
based) using the UP/DOWN arrow keys and press OK. Select your mobile service
provider and press OK to input your receiving phone number. Proceed to Step 6.
If "Auto Setting" does not work (which may be due to recent changes made by your service provider) or if your
1
mobile service provider is not on the list for your country, please use the "Manual Setting" option instead. Your
service provider can help you with the correct settings to enter.
Step 5B (SMTP Setup): If you are using an SMTP enabled SIM card, and wish to get
images via data rather than text, select "Email via SMTP" instead, then press OK.
Limited auto setup is available (for SMTP carrier info). You will still need to create
a new email account to add it as sender with email address and password, then
choose your sender email provider in the "Manual Settings" screen
.
Select your country (where your mobile phone service is
(2)
. Next, select
5