Stroller Operation - UPPAbaby CRUZ Manual Del Usuario

STROLLER OPERATION
SET SWIVEL/
LOCKING SYSTEM
TO LOCK WHEEL SWIVEL: Push button down to
lock. Lock wheel swivel if traveling through rough
terrain or sand.
TO UNLOCK: Slide button up.
ADJUST HANDLE HEIGHT
+ LEG REST
TO ADJUST HANDLE: Engage button at top and
slide handle to one of three desired positions
suited to user height and comfort.
TO ADJUST LEG REST: Simultaneously push
buttons on sides of leg rest and rotate to
desired position.
UPPAbaby CRUZ Instruction Manual
SET THE BRAKE
TO LOCK BRAKE: Brake is located in center of rear
crossbar. Push down pedal with foot to lock.
TO RELEASE BRAKE: Either push front edge of
pedal forward or use foot to lift pedal up.
CORRECT ATTACHMENT
OF ACCESSORIES
PROPER INSTALLATION OF RAIN SHIELD
PROPER INSTALLATION OF BUG SHIELD
6
STROLLER OPERATION
SEAT OPERATION
TO ATTACH: Lower seat onto frame in forward or reverse position and press down until it clicks into place.
Pull up on seat to ensure it is locked to frame.
TO REMOVE: Simultaneously push down both
release buttons (1) and lift seat from frame (2).
NOTE: Do not use upright position for infants less than six months old. Use the most reclined position
and gradually reposition seat more upright as child is able to support his or her head without assistance.
SEAT HARNESS OPERATION
TO LOCK: Slide both belt ends into TO ADJUST: Detach adjustment clip from upper or lower harness
buckle housing until it locks. attachment loop. (Remove harness pad if necessary to facilitate harness
adjustment.) Reattach clip to desired harness loop. Use loop location
TO UNLOCK: Depress button at
above child's shoulder line, or closest to child's shoulder.
center and pull apart.
WARNING:
Use 5-point harness at all times to restrain child while in stroller. Adjust harness to fit child securely.
TO TILT: Pull lever up and tilt seat to desired position.
Release lever to lock in one of five preset positions.
7
ENGLISH