Stroller Operation - UPPAbaby CRUZ 2015 Manual Del Usuario

STROLLER ASSEMBLY
INSTALLING FRONT WHEELS
To Install Front Wheels: Slide wheel post into housing
until it locks into place.
INSTALLING BACK WHEELS
To Install Back Wheels: Slide wheel post into housing
until it locks into place.
ATTACHING/REMOVING THE BUMPER BAR
STEP 1: Insert metal posts into bumper bar
attachment slots found on both sides of seat.
6
To Remove Front Wheels: Push button located
on the inside of the front fork and slide wheel off.
To Remove Back Wheels: Pull tab down on bottom
of fork and slide wheel out .
STEP 2: To remove, press button at bottom of plastic
housing and lift bumper bar out.

STROLLER OPERATION

SETTING THE BRAKE
ADJUSTING HANDLE HEIGHT + LEG REST
To Adjust Handle: Squeeze button at top and slide
handle to one of three desired positions suited to
user height and comfort.
To Lock Wheel Swivel: Push button down to
lock. Lock wheel swivel if traveling through rough
terrain or sand.
To Unlock Wheel Swivel: Slide button up.
To Lock Brake: Brake is located in center of rear
crossbar. Push down pedal with foot to lock.
To Release Brake: Either push front edge of
pedal forward or use foot to lift pedal up.
To Adjust Leg Rest: Simultaneously push
buttons on sides of leg rest and rotate to
desired position.
7