Cleaning The Machine - Stihl RT 5097.1 Manual De Instrucciones

RT 6127 ZL are equipped with an hour
meter. The operating hours are indicated
as full hours.
● With the engine switched off, turn the
ignition key to the "ignition on" position.
( 8.1)
The operating hours are shown on the
display for 5 seconds. (
● With the engine running, press the
Mode button. ( 10.3)
The operating hours are shown on the
display for 5 seconds.
Maintenance operations prior to initial
use:
In order to achieve more efficient and safer
operation and to prevent faults, it is
important to be familiar with the condition
of the machine.
For this purpose, the following checks are
required before each start (visual
inspection):
– Tyre pressure. ( 15.16)
– Wear and damage to tyres.
– Leaks in fuel carrying lines.
– Engine oil level (see engine instruction
manual).
– Fuel-tank level.
– General visual inspection of the
machine and mowing deck. Particularly
the protective covers must be inspected
for damage.
– Tightness of bolted connections.
Maintenance operations after each use:
– Clean the entire machine (mowing
deck, discharge chute, grass catcher
box) and all attachments.
0478 192 9813 C - EN
– Observe the instructions on cleaning
the engine (see engine instruction
manual).
– Remove grass residues from the
gearbox (by brushing off), remove any
other dirt from the gearbox.
– Check the cooling ribs of the engine
10.1)
and hydrostatic gearbox and clean if
necessary.
Maintenance operations after the first
10 operating hours (initial operation):
– An inspection by your specialist dealer
is recommended.
STIHL recommends STIHL specialist
dealers.
Maintenance operations after every
25 operating hours:
– Check the blade fastenings and
mowing blade wear limits.
– Check the installation position of the
mowing blades (RT 5112 Z,
RT 6112 ZL, RT 6127 ZL).
Maintenance operations after every 50
operating hours:
– Check the installation position of the
mowing deck. (
Maintenance operations after every 100
operating hours:
– Replace the mowing blades.
– Maintain the V-belt or toothed belt.
– Inspection by a specialist dealer. STIHL
recommends STIHL specialist dealers.
All required maintenance
operations on the brake system and
gearbox are carried out during the
inspection.

15.2 Cleaning the machine

● Stop the engine. (
● Engage the parking brake. (
● Remove the ignition key and keep it in a
15.14)
● Remove the mowing deck. (
● First, remove accumulated clipping
● Clean the underside of the mowing
● When cleaning the upper side of the
Avoid damage to the machine!
Never spray water (high-pressure
cleaner) onto engine components,
seals, electrical components
(battery, wiring harness, etc.) and
bearing points. This may result in
damage and expensive repairs.
Do not use aggressive cleaning
agents. These cleaners can
damage plastics and metals,
impairing the safe operation of your
STIHL machine. If you are unable
to remove the dirt with water using
a brush or a cloth, STIHL
recommends the use of a special
cleaner (e.g. STIHL special
cleaner).
Always remove the mowing deck
for cleaning and maintenance
operations.
13.3)
safe place.
deposits in the mowing deck housing
using a stick.
deck with water and a brush.
mowing deck, ensure that the V-belt
and toothed belt do not get wet – never
spray water into the openings in the
covers.
8.14)
14.1)
45