Control Panel Features - LG DF20WKSE Manual Del Propietário

10
iNTrODuCTiON

Control Panel Features

Following are instructions for starting and using your new dryer. Please refer to specific sections of this
manual for more detailed information.
wWARNING : To reduce the risk of fire, electric shock, or injury to persons, read this entire manual,
including the Important Safety Instructions, before operating this dryer.
G
A POWER (ON/OFF) BUTTON
Press to turn the dryer ON or OFF. Pressing the
POWER button during a cycle will cancel that
cycle and any settings will be lost.
CYCLE SELECTOR KNOB
B
The cycle selector knob is used to select the
desired dry cycle by rotating the knob in
either direction until the desired cycle LED is
illuminated. Once the desired cycle has been
selected, the standard presets for that cycle
will show in the display. These settings can be
adjusted using the cycle modifi er or option
buttons any time before starting the cycle.
C START/PAUSE BUTTON
Press this button to start the selected cycle. The
dryer will display the estimated time or set time
remaining and start tumbling. To pause the
cycle at any time, open the dryer door or press
START/PAUSE. To resume the cycle where it was
stopped, press START/PAUSE again.
NOTE
If the dryer has been stopped for more than 60
minutes, the dryer will turn off automatically.
A B
F
C
D OPTION BUTTONS
These buttons allow you to select cycle options.
Some of the option buttons have secondary
functions. The controls can be locked or
unlocked by pressing and holding the DAMP
DRY SIGNAL button for three seconds.
NOTE
To protect your fabrics, not all settings are allowed
in all cycles.
E CYCLE MODIFIER BUTTONS
Use these buttons to adjust the settings for
the selected cycle. The settings light up above
the buttons to show the current selection. The
default temperature setting cannot be changed
in Sensor Dry cycles. Sensor Dry cycles are
modified using the DRY LEVEL button.
F TIME AND STATUS DISPLAY
The display shows the estimated time
remaining for auto cycles and actual time
for timed cycles. The status of the cycle is
also displayed. The Flow Sense indicator will
illuminate if there is a serious restriction in the
exhaust system.
g STEAM FUNCTIONS
LG's steam technology allows you to inject
fabrics with a swirling jet of hot steam to
refresh clothes, reduce static, and make ironing
easier. Simply select the Steam Fresh™ cycle, or
you can add a STEAM option to selected cycles.
D
E