Luminance Brands Kathy Ireland Home RAH ECO CF915TM60BS00 El Manual Del Propietario página 17

6.8
Tuck the Wires and Terminals into the LED Light Fixture
Assembly and position on the Lower Housing.
NOTE: Make sure Wires and Terminals are
positioned under the LED Light Fixture Assembly
and not pinched between LED Light Fixture
Assembly and Lower Housing.
Rotate the LED Light Fixture Assembly counter-
clockwise to engage the key hole slots onto the two
#8-32 x 3/8" Pan Head Screws (Figure 28).
Secure the LED Light Fixture Assembly by tightening
the two #8-32 x 3/8" Pan Head Screws.
Reinstall and tighten the previously removed #8-32 x
3/8" Pan Head Screw.
A spare #8-32 x 3/8" Pan Head Screw is supplied in the
loose parts bag, if required.
WARNING
!
To avoid possible fire or shock, make sure that the
electrical wires and connectors are completely inside the
lower housing and not pinched between the LED light
fixture assembly and lower housing.
6.9
Place the Shade into the Lower Housing, aligning the
three flat areas on the top flange of the Shade with
the three raised Dimples on the inside of the Lower
Housing (Figure 29).
Then turn the Shade clockwise until it stops turning.
NOTE: Periodically check that the Shade is seated
fully clockwise in the Lower Housing.
Please call Customer Service at 1-800-777-4440
if you have any questions about installation and
operation of this Ceiling Fan.
6. Final Installation
(Continued)
TIGHTEN #8-32 x 3/8"
PAN HEAD SCREWS
LED LIGHT FIXTURE
ASSEMBLY
REINSTALL ONE #8-32 x 3/8"
PAN HEAD SCREW
Figure 28
FLAT AREA
OF SHADE
SHADE
Figure 29
17
LOWER HOUSING
RAISED DIMPLES (3)
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
U.L. Model No.: CF915