Luminance Brands Kathy Ireland Home LURAY ECO El Manual Del Propietario página 8

3. Ceiling Fan Assembly
3.7
Separate, untwist and unkink the Two 80" Motor Wires.
Route the Two Motor Wires through the 4.5" Downrod
(Figure 7).
3.8
Loosen the Two Phillips Head Set Screws in the Motor
Coupler for installation of the Downrod (Figure 8).
Seat the Downrod in the Motor Coupler (Figure 8).
Rotate and align the Downrod Holes with all the Holes
in the Motor Coupler (Figure 8).
3.9
Align the Clevis Pin Holes in the Downrod with the
Holes in the Motor Coupler.
Install the Clevis Pin and secure with the Hairpin Clip
(Figure 9).
The Clevis Pin must go through the Holes in the Motor
Coupler. It is critical that the Clevis Pin in the Motor
Coupler is properly installed and securely tightened.
Evenly retighten the Two Phillips Head Set Screws to
secure the Downrod to the Motor Coupler in a vertical
position (Figure 9).
WARNING
!
It is critical that the clevis pin and set screws in the
motor coupler are properly installed and securely
tightened. Failure to verify that the pin and set screws
are properly installed could result in the fan falling.
(Continued)
TWO 80" MOTOR WIRES (UNTWISTED)
TWO 80" MOTOR LEADS (UNTWISTED)
Figure 7
LOOSEN
PHILLIPS HEAD
SETSCREWS (2)
Figure 8
HAIRPIN
CLIP
CLEVIS
PIN
CLEVIS
PIN
Figure 9
8
4.5" DOWNROD
4.5"
DOWNROD
MOTOR
COUPLING
MOTOR
COUPLING
HAIRPIN
CLIP
ETL Model No.: CF860