Automatic Power-Off Function; Cleaning And Maintenance - Klarstein Turmheizer Manual De Instrucciones

EN
16
for the first time for 2 seconds to open the children lock function. Repeat this action to
close it.

Automatic power-off function

Screen displays "--" if the heater is not under Temperature Control mode. When the timer
function is off, the heater will automatically shut off with no operation during 12 hours.
Remote-control unit
The use of remote-control unit: Key function is consistent with machine body control
panel.
Intelligent mode
In the Intelligent mode, press "+" and "-" keys to set wanted temperature. When
environment temperature is lower than set temperature (by more than 2 °C), the product
heats in high warm wind mode; when environment temperature is close to the set
temperature (by less than 2 °C or more), the product heats on low warm wind mode;
when environment temperature is higher than set temperature, the product stops heating.

CLEANING AND MAINTENANCE

1. Light accumulated dust may be removed from the heater with a soft cloth. Wipe the
exterior surfaces of the heater occasionally with a cloth moistened (not dripping
wet) with a solution of mild detergent and water. Dry the case thoroughly with a soft
dry cloth before operating the heater.
2. The fan motor is lubricated by the factory, and will require no further lubrication.
3. No other user maintenance is required or recommended. If service is required, send
your heater to the nearest authorized servicedepot.
4. Store heater in a clean and dry place when not in use.
REMEMBER - Portable electric heaters are designed for spot heating, or as a
supplementary heat source. They are not intended to be main sources of heat during the
normal heating season.
Note: There may be trace of smoke or odour when unit is first operated. Do not be on
the heating coil during the manufacturing process. It will quickly evaporate, and should
not reoccur.