Safety Instructions; Initial Setup - swissflex uni 11 95RF Modo De Empleo

Health and comfort
Welcome to the world of Swissflex!
Your Swissflex uni 11_95RF interactive | ambiente 11_95RF
interactive is a Swiss quality product. If you follow the
simple operating and safety instructions, it will function to
your complete satisfaction for many years. In addition to
its many other advantages, your uni 11_95RF interactive |
ambiente 11_95RF interactive offers an undisturbed sleep
environment. All electrical connections between the mains
plug and the bed are free of mains voltage in standby mode.
Place the user socket (31) about 1 metre (40") from the bed
to ensure that the area directly surrounding the bed is free
from electrical and electromagnetic fields while you sleep.
Safety instructions
CAUTION! T he uni 11_95RF interactive | ambiente 11_95RF
interactive and accessories must be protected from rain
and other moisture to prevent causing a fire hazard or
the risk of electric shock. In case of spillages on an acces-
sory, the mains cable (30) must be disconnected from the
power outlet and checked by your Swissflex stockist.
g Do not store or use the uni 11_95RF interactive | ambiente
11_95RF interactive or accessories in extreme temperatures
(above 60 °C), as this can lead to malfunctions and defor-
mation of parts. The uni 11_95RF interactive | ambiente
11_95RF interactive was designed for use in temperatures
between +5 °C and 40 °C.
g When installing the slat base, ensure that the head, back
and foot sections are not obstructed by furniture.
g Ensure that the mains supply is disconnected before any
assembly or disassembly work is carried out on the slat
base or the bed frame.
g Do not connect any devices to the user socket (31) that
could endanger persons or damage objects when the sok-
ket is turned on by remote control, in particular electrical
tools such as saws, drills and similar (risk of injury) or por-
table heating devices (risk of fire).
g To avoid damaging electronic parts or causing injury,
do not feed cables through the adjustment mechanism.
Ensure that the different comfort sections of the slat base
are not obstructed, as this can cause overheating and da-
mage to the motors.
g To avoid damaging the cable, do not place heavy ob-
jects on the cable.
g Never place the connection cable between the user sok-
ket (31) and the bed in such a way that the cable insulation
could be damaged by sharp edges or twists. Never feed the
cable through the adjustment mechanism.
g In the case of damage to cables to the control housing or
to the user socket (31), do not adjust the bed to a seated
position. Remove the mains plug from the socket and in-
form your Swissflex stockist.
g Handle the uni 11_95RF interactive | ambiente 11_95RF
interactive and accessories with care; do not disas-
semble or modify them.
GB
g Never loosen the screws on the side of the user socket
(31) to which the cable is connected. If you interfere with
any electrical part of the user socket (31), the guarantee
entitlements will no longer apply. Never allow children
to „play" on the sit-up bed without supervision because
of the risk of injury.
g For safety reasons, change the batteries in the
motor control every 3 years and the ones in the
radio remote control every 6 to 12 months to pre-
vent leakages. Swissflex recommends the use of
leak-proof 9V block batteries (motor control) and
A A A batteries (radio remote control). In the case
of skin or eye contact with battery fluid, wash the
affected area with plenty of water and seek medical
assistance. Batteries must be disposed of through
your stockist.
Initial setup
Place the batteries into the radio remote control
g Remove the cover of the battery compartment (20) on
the back of the radio remote control. Place 3 AAA-batte-
ries (21) into the compartment, paying attention to the
+/- markings. Close the compartment cover again. The
maximum range of the radio remote control is 15 metres.
Swissflex is not aware of any adverse effects on health of
radio waves.
g Connect the LED floor light to the relevant connector
(26) on the remote control.
Toroidal core with mains isolation
g Connect the mains supply unit to the connection for the
mains supply unit (27) using the connection cable. Use
the mains cable (29) to connect the mains supply unit (30)
to a socket. Thanks to the toroidal core transformer tech-
nology, separate mains isolation is no longer necessary.
When the uni 11_95RF interactive | ambiente 11_95RF in-
teractive is in use, the isolated toroidal core transformer
in the mains supply unit reduces electromagnetic fields to
an absolute minimum.
Recommendations for use of radio control
g Please be aware that the range of the radio remote
control may be affected by the conditions in the sur-
rounding area. Other radio-controlled devices may
deteriorate the function of the radio remote control.
Examples of such devices include radio transmitter
masts, mobile phones and radio order systems in re-
staurants. In order to ensure good reception, do not
place the control with the radio receiver directly on
a metal sheet. Keep metal objects at a distance of at
least 5 centimetres. The radio transmitter and recei-
ver may only be used within the European Community
and within the area of validity of INTO 300220 (radio
SRD 868MHz).
Operating instructions
13