Tabla de contenido
Idiomas disponibles
Idiomas disponibles
129959
•
Use of a residual current device will reduce the risk of electric shock.
NEVER CONNECT THE BROWN OR BLUE WIRE TO THE EARTH PIN OF A 13A
PLUG. IF IN DOUBT CONSULT A QUALIFIED ELECTRICIAN
Dangerous environment
•
Do not use power tools in damp or wet conditions, or expose them to
rain. Provide adequate surrounding work space and keep the area well
lit. Do not use power tools where there is a risk of explosion or fire from
combustible material, flammable liquids, flammable gases, or dust of
an explosive nature. When using power tools, avoid contact with any
earthed items such as pipes, radiators, cookers, refrigerators, metal
baths and taps.
Protect yourself from vibration
•
Hand-held power tools may produce vibration. Vibration can cause
disease. Gloves may help to maintain good blood circulation in the
fingers. Hand-held tools should not be used for long periods without a
break.
Maintain your power tool
•
Ensure all ventilation holes are kept clear at all times, otherwise
overheating and fire may occur.
Always disconnect
•
Before changing fittings or accessories, always disconnect the tool from
the power source.
Switch off before connecting
•
Ensure the power tool is switched off before connecting to the power
source. If the power tool stops unexpectedly, turn the power switch to
OFF.
Do not abuse the power cord
•
Be sure the cable / extension cable is in good condition. Always have
a damaged cable / extension cable replaced at an authorised service
centre before using. Never pull the cable to disconnect it from the power
socket. Never carry the tool by its cable. Keep the cable away from damp,
heat, oil, solvents, and sharp edges.
Do not leave the tool running unattended
•
Always wait until the tool has completely stopped functioning and has
been unplugged before leaving it unattended.
Product Familiarisation
1
Chuck
2
Hammer Selection Switch
3
Reverse Switch
4
Lock On Button
5
On/Off Switch
6
Speed Control Dial
7
Side Handle
www.silverlinetools.com
710W Hammer Drill
5
Tabla de contenido
