Complete The Installation - Kohler K-7702 Guia De Instalacion

Drain Body
Tailpiece

2. Complete the Installation

Insert the stopper assembly into the drain flange. Choose the long
or short ball lever.
Fit the short end of the ball lever into the drain lever hole and
under the stopper assembly for regular installations.
Fit the ball lever through the hole in the stopper assembly for
vandal-resistant installations.
Loosely secure in place with the knurled nut.
Remove and adjust the stopper assembly so the stopper lifts
about 3/8" (1 cm) when opened.
Tighten the knurled nut, making certain not to scratch the finish.
Install the ball to the ball lever for under-the-lavatory control
installations. Install the connecting link and V-clip to the ball
lever for countertop control installations.
Complete assembly of the countertop control installation
according to the instructions included with the lift rod and
escutcheon.
Apply thread sealant to the tailpiece.
Kohler Co.
Stopper Assembly
Drain Flange
Locknut
Ball Lever
Knurled Nut
Ball
V-Clip
5
Connecting
Link
1032344-2-B