Troubleshooting - GYS FLASH 6.12 Manual De Instrucciones

TROUBLESHOOTING

Symptoms
1
The indicator blinks.
2
The indicator is on.
The indicator stays on even after pres-
3
sing the button.
4
The indicator blinks.
5
The indicator stays on.
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
GYSFLASH 6.12
Causes
• Polarity inversion
• Battery voltage is too high
• Clamps in short-circuit
Charge failure, battery non recoverable.
Thermal protection.
Charger in sleep mode.
Charge interrupted by pressing the
button.
Remedies
• Check that the clamps are properly connected.
• Check that it is a 12V battery.
Change the battery and press
charge.
Ambient temperature is too high (>50°C), cool the
room and let the charger cool down.
Press the button or connect a battery to the
charger to exit sleep mode.
Press again to restart the charge.
EN
to restart a
9