Troubleshooting - GYS GYSFLASH S 4.12 Manual De Uso

Operating manual
Step : Analysis
1
Analyses the battery state (charge level, polarity inversion,
wrong battery...)
Step : Recovery ( 0.5A
2
Damaged elements recovery due to an extended deep
discharge algorithm.
3
Step : Test
Sulfated battery test.
Step 4 : Desulfation (
Battery desulfation algorithm.
• Estimated charge time
Battery capacity
Charging time 20% >>> 80%
If the motorbike is fitted with a 12V plug, the GYSFLASH S 4.12 can charge the battery via this plug with the CAN-BUS
system, without switching the dashboard on. In this setup, connect the cigarette lighter adapter on the charger and on
the motorbike's 12V socket then follow the «start up » procedure on the previous page. In certain cases, it is possible
that the charge will only start 2 minutes after performing the connections.
• Protections :
The GYSFLASH S 4.12 has several features to protect it against short-circuits or polarity inversion. It has an an-
ti-spark feature which prevents sparks whilst connecting the device to the battery. This charger has double insulation
and is compatible with vehicle's onboard electronics.
The GYSFLASH S 4.12 is fitted with an integrated temperature probe that ensures that the charging current is adapted to the am-
bient temprature to prevent internal electronics' overheating.

TROUBLESHOOTING

Symptoms
1
The indicator blinks.
2
The indicator is on.
The indicator stays on even after pres-
3
sing the button.
4
The indicator blinks.
5
The indicator stays on.
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
Translation of the original
instructions
2A)
15.8V)
2Ah 8Ah
2h 6h
• Polarity inversion
• Battery voltage is too high
• Clamps in short-circuit
Charge failure, battery non recoverable.
Thermal protection.
Charger in sleep mode.
Charge interrupted by pressing the
button.
Step : Charge (
5 0.8A
Fast charge with maximum current that can reach 80% charge
level.
Step : Absorption (14.4V or 14.7V with
6
Constant voltage charge to reach a 100% charge level.
7
Step : Floating charge (13.6V)
Maintains battery charge level at its maximum.
15Ah 18Ah
11h 3h
Causes
• Check that the clamps are properly connected.
• Check that it is a 12V battery.
Change the battery and press
charge.
Ambient temperature is too high (>50°C), cool the
room and let the charger cool down.
Press the button
charger to exit sleep mode.
Press
GYSFLASH S 4.12
4A)
AGM option)
50Ah 90Ah
8h 14h
Remedies
to restart a
or connect a battery to the
again to restart the charge.
9