Steren MP4-300 Manual De Instrucciones página 35

7.- OPERATION
Saving / viewing images on the transmitter
1.- Using a USB (male-male) cable connect the
transmitter to a computer. Wait for the computer to
recognize the transmitter and access it.
2.- Once you have accessed the transmitter, select
the images from the folders that you wish (in JPEG
or GIF format) and drag and drop these or copy and
paste the ones you wish to transfer.
3.- To safely disconnect the transmitter, exit all active applications and folders on the transmitter, then right-click
on the external hardware icon that is in the bottom right corner of the screen in the task bar. Select "Safely
Remove Hardware" and from that menu select the transmitter.
When the system indicates you may safely remove the hardware, disconnect the transmitter from the USB port.
Do not remove the transmitter when it is in use. Doing so could damage the device and result in loss of data.
Steren is not responsible for any data loss. Do not format the device.
4.- Follow the steps in the section titled Connection (page 9) to use the transmitter in your automobile.
PHOTO
5.- Turn on the transmitter, then press and hold the
screen and select PHOTO.
6.- Use the << and >> buttons on the transmitter, or the
remote controls to navigate through the images.
7.- To exit this mode and return to the main menu, simply press and hold the
button.
until you see the menu
/ buttons on the
15