Bartscher 18340D Manual Del Usuario página 57


x2
After pressing

When setting is made with use of numeric buttons, the preset cooking time is
shown on the display.
Example:
the preset cooking time for numeric button "5" is 1 minute.
After pressing
1: 0 *(1 +0.8) = 1 48 (1 minute and 48 seconds).

After finishing the program the device switches to the cooking cycle end mode and
the digital display shows "DONE".
Programming of multistage cooking

In most cooking and programming modes it is possible to set up to three cooking
stages for each program.
After setting the cooking time and power level press "
stage. Perform the same
steps for the second and the third cooking stage.

During setting the second and the third cooking stage the digital display shows
"STAGE-2" or "STAGE-3".

Press "START" button to activate the set multistage cooking time.
Example: In the programming mode perform the two-stage cooking time.
The first cooking stage: power level PL7,
cooking time 1 minute and 25 seconds
The second cooking stage: power level PL5,
cooking time 5 minutes and 40 seconds
Perform the following steps:
a. Open the oven door, press button "1" for 5 seconds until the digital display
shows "PROGRAM".
b. Press the numeric button "3", the digital display shows "P:03" and after
2 seconds the preset cooking time ":30".
c. Press the numeric buttons "1", "2", and "5" to set the cooking time to 1 minute
and 25 seconds. The cooking time "1:25" will be shown on the display.
d. Press "70% / MED-HI" button, the digital display shows "1:25 70".
Setting of cooking stage 1 is finished.
e. Press " ", the digital display shows "STAGE-2".
f. Press buttons "5", "4", and "0" to set the cooking time for that stage.
The digital display shows the cooking time "5:40".
g. Press "50% / MEDIUM". The digital display
shows "5:40 50". Setting of cooking stage 2 is finished.
the digital display shows "DOUBLE".
x2 the cooking time is changed:
" to go to the next cooking
- 53 -