Smartwares HA788GSM Manual De Instrucciones página 4

Step 10 – Adding numbers for Alarm no�fica�on
1. Press Se�ng, alerts and type the number in any of the available spaces.
2. Photo Id numbers for calling or SMS may be added.
Note: Adding a contact into the SMS list will also enable that
contact to have limited access of the GSM panel using the App.
They can Arm/Partial Arm/Disarm the system but do not have
access to other settings.
Step 11 – Customize RFID and Zone names
1. Press se�ngs in the app, then tags, to rename RFID tags
2. Select the tag that you wish to customize.
3. Select a person from contact list including image and then enter the image
and name.
4. An SMS may be sent to no�fy of the system change.
5. Press Zones to rename security accessories
6. Rename the zones according to the device loca�ons for example "Main door".
7. If the changes are successful, the user will receive a confirma�on SMS
Step 12 – Change Default PIN code
It is advised to change the default system PIN code to prevent unauthorized any access to
your alarm panel.
1. To do so, on the alarm panel enter
1234 06
2. A�er hearing the beep, enter the new 4-digit PIN code +
****
3. To make sure the new PIN code has been changed, try to arm the system.
****
4. The system should arm successfully using the new PIN code.
Step 13 – Final test before moun�ng the system
Perform a quick test a�er the system has been set up and configured.
1. First Disarm the system using the App
2. Re-arm the system using the App
3. Trigger an alarm using the PIR and door/window detector.
4. Use the remote control to turn off the alarm once it has been triggered.
5. Check the no�fica�ons to ensure that they are correct.
Note: To conserve its battery life, the PIR Motion sensor
can be triggered only once every 2 minutes.
Daily opera�ons from alarm panel:
u F n t c o i n B t u o t I n o c n e R m a k r
Arm Ac�vates the alarm for monitoring.
Disarm Deac�vates the alarm.
A t c o i n
Enter (PIN code) +
Enter (PIN code ) +