Smartwares HA788GSM Manual De Instrucciones página 2

HA788GSM Quickstart Guide GB
Congratula�ons on your purchase of the HA788GSM Alarm system. You have just purchased one
of the most advanced and feature rich wireless security systems on the market today.
We recommended you go through the User's Instructions to fully understand the system and
plan your installa�on. If you wish to set up the system immediately, please read this guide first.
This quickstart guide describes the basic steps to install your HA788GSM Alarm System (alarm
panel, window sensors, mo�on sensor and RFID keychain transmitter).
ALARM PANEL OVERVIEW
A. Touch keypad D. RFID sensor area
B. Microphone E. GSM status led
C. Siren F. Speaker
1. Remove ba�ery cover of the alarm panel.
2. Insert the SIM card into the slot and connect the 9V
3. Wait un�l the GSM status led blinks slowly (once every 3
1. Install ba�eries in the included accessories.
2. Open the PIR rear cover and insert the ba�eries (Figure A)
3. Twist open the ba�ery cover of the remote control and insert the coin cell ba�ery inside.
4. Open the door/ window contact ba�ery cover and insert the 3 ba�eries (Figure C)
1. Begin configura�on by entering the default configura�on PIN code '1234'
G. Ba�ery cover
H. Wall moun�ng bracket
2. You will receive an SMS message saying phone number set successfully.
3. Your alarm panel can now be controlled from the smartphone app (Step 9).
Step 1 – Power on and SIM Card Installa�on
power adapter.
Note: SIM card needs to be unlocked before use. You can
use a mobile phone to cancel the input of PIN code or PUK
code.
seconds) implying the SIM card is ready for use.
Step 2 – Insert the ba�eries
(Figure B). Replace the cover and press any key to ensure the red LED on the remote light up
B
A
Step 3 – Se�ng up the GSM host number
1234 66
(example: 1234 + 66 + + 09 5555 1212 +
C
Owner's
Phone number
)