Ryobi ERGO Traducción De Las Instrucciones Originales página 18

Do not operate charger if it has
received a sharp blow, been dropped,
or otherwise damaged in any way.
Take it to an authorised serviceman
for electrical check to determine if the
charger is in good working order.
Do not disassemble charger. Take it
to an authorised serviceman when
service or repair is required. Incorrect
reassembly may result in a risk of
electric shock or fire.
Unplug charger from outlet before
attempting any
cleaning to reduce the risk of electric
shock.
Disconnect charger from the power
supply when not in use. This will
reduce the risk of electric shock or
damage to the charger if metal items
should fall into the opening. It also will
help prevent damage to the charger
during a power surge.
Risk of electric shock. Do not touch
uninsulated portion of output connector
or uninsulated battery terminal.
Do not recharge primary cells (non-
rechargeable).
The recommended
temperature range for the charging
system during charging is between
10°C and 38°C.
BATTERY SAFETY WARNINGS
Li-ion
Do not dispose of used battery packs
in the household refuse or by burning
them. To ensure proper disposal of
waste battery packs and protect the
environment, hand over old battery
2 | English
maintenance or
ambient
packs to your RYOBI distributor.
Segregate electronic waste properly
by removing integrated battery packs
from the main unit before disposal.
Hand them over to applicable collection
points.
To remove the integrated battery pack:
Separate the housing shells from
one another by removing the screws.
Disconnect the battery pack from the
circuit and remove.
NOTE: When opened, the product is
no longer reusable or serviceable and
should be disposed of properly.
Before removing the battery pack
from the power tool, switch on the
product until the battery pack is fully
discharged.
Ensure that the battery pack to be
disposed of cannot come in contact
with batteries, other battery packs,
or conductive materials by protecting
exposed connectors with insulating,
non-conductive caps or tape.
Never charge a damaged battery pack.
Ambient temperature range for battery
during use is between 0°C and 40°C.
Ambient temperature range for battery
storage is between 0°C and 20°C.
ADDITIONAL BATTERY SAFETY
WARNING
short circuit, never immerse your tool,
certain industrial chemicals, and bleach
or bleach-containing products, etc., can
cause a short circuit.