Zavor LUX LCD Manual Del Usuario página 39

in good working order before each use.
1. After the unit has cooled, remove the lid from the multi-cooker.
2. Press down and turn the pressure regulator knob counterclockwise past
STEAM to CLEAN and carefully lift to remove. Look through the removed knob
to make sure there is no particle build-up, and put it under running water to
clean.
3. Turn the lid over and place it on a table top. Pull out the anti-blocking case.
Using a brush or toothpick, check and remove any food or foreign particles
that may be lodged in the pressure discharging tube that is inside the anti-
block cover. Replace the anti-blocking case pressing it down back into place.
4. Replace the pressure regulator knob by lining the CLEAN dot with the dot on
the lid of the unit and turning clockwise until it goes into place. The dot on the
base of the pressure regulator should line up with the PRESSURE or STEAM
setting on the pressure regulator knob. If it doesn't, remove the knob again and
try realigning the dots the other way around.
(1) (2) (3)
(5) (4)
37