Eaton Crouse-Hinds Serie Información De Instalación Y Mantenimiento
Eaton Crouse-Hinds Serie Información De Instalación Y Mantenimiento

Eaton Crouse-Hinds Serie Información De Instalación Y Mantenimiento

Fmva/pfma cable de seguridad de reflector led
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

FMVA/PFMA LED floodlight safety cable
(Part number: SC831)
Installation & maintenance information
SAFETY CABLE INSTALLATION INSTRUCTIONS –
20L/25L
1.
Remove power from floodlight.
2.
Select a mounting location directly above luminaire's center of gravity
(centerline of fixture).
3.
Install appropriate corrosion-resistant hardware into wall or surface to
interface with safety cable. Weight of floodlight is 45 lbs.
4.
Ensure that safety cable is taut, and there is no slack in the cable after
installation. Wrap safety cable around yoke.
5.
Install safety cable loop in carabiner.
6.
Attach carabiner to mounting hardware, and ensure that carabiner
gate is installed fully on threads.
Safety cable accessory part number: SC831
SAFETY CABLE ROUTING – 40L/50L
1.
Remove power from floodlight.
2.
Select a mounting location directly above luminaire center of gravity
(centerline of fixture).
3.
Use two (2) safety cables, one around each side bracket, when
installing for use with floodlight.
4.
Install appropriate corrosion-resistant hardware into wall or surface to
interface with safety cable. Weight of floodlight is 81 lbs.
5.
Wrap one (1) safety cable around each side bracket. Ensure that
safety cable is taut, and there is no slack in the cable after installation.
6.
Install safety cable loop in carabiner.
7.
Attach carabiner to mounting hardware, and ensure that carabiner
gate is installed fully on threads.
Safety cable accessory part number: SC831
All statements, technical information and recommendations contained herein are based on information and tests we believe to be reliable. The accuracy or completeness thereof are not guaranteed. In
accordance with Eaton's Crouse-Hinds Division's "Terms and Conditions of Sale," and since conditions of use are outside our control, the purchaser should determine the suitability of the product for his intended
use and assumes all risk and liability whatsoever in connection therewith.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
Eaton's Crouse-Hinds Division
1201 Wolf Street, Syracuse, New York 13208 • U.S.A.
Copyright
2018
©
IF 1858
IF 1858
Revision 1
New 09/18
loading

Resumen de contenidos para Eaton Crouse-Hinds Serie

  • Página 3 Todas las declaraciones, información técnica y recomendaciones contenidas en el presente se basan en información y pruebas que creemos que son confiables. No se garantiza su precisión o integridad. De acuerdo con los “Términos y Condiciones de Venta” de la división Crouse-Hinds de Eaton, y dado que las condiciones de uso se encuentran fuera de nuestro control, el comprador debe determinar la idoneidad del producto para su uso indicado y asume todos los riesgos y responsabilidades al respecto.

Este manual también es adecuado para:

Sc831